Author Topic: New Member  (Read 3982 times)

Offline Fossil_Fuel

  • New Users
  • Posts: 2
  • Newbie
New Member
« on: February 09, 2012, 06:51:35 pm »
Hello everyone,
I thought I would join to learn and share.  I was out looking at a parts car for a different restoration and this Silverado just followed me home like a lost dog.  In reality I have been wanting one again for some time.  The last one of these body style  I had was more than 15 years ago.  I have much on my plate but this one struck me as needing some attention.

My near term plans are to get it up to snuff mechanically and then address the cosmetics after I get one of my other projects completed.

But.. I like knowing the details of what I have.  So please let me know what I have and what it is not.

I have only spent about an hour with this truck and I have not even brought it home yet.  I will get better pictures when I get the time.

I have posted a few pictures of this truck on my share site.  You can ignore my other Chevy's if you don't care for vehicles without a bed!

www.craigaacars.shutterfly.com/pictures

Here is all I know (or at least I think)

1976 K10 Silverado
400 CI engine
130,000 miles
"was running when I parked it"   Plates are from '96
Looks like it is all there and original except missing alternator
CB radio and big mud flaps
Deluxe Paint?
Dual Tanks

I would like to know what is standard vs optional on this unit.
Also anything I should be aware of for this year/model?

I will ask lots of questions.

Comments and thoughts appreciated

Happy to have found this site.

Craig

Offline thirsty

  • Senior Member
  • ****
  • Posts: 1289
    • Suitor's Garage
Re: New Member
« Reply #1 on: February 09, 2012, 07:11:44 pm »
Welcome to the site from NH.
Looks like you got a lot to work with there. If you look in your glove box the spid might be there still. That will tell you what options it came with. Also I have seen build sheets on the bottom of the seat before. It looks like it was optioned pretty good just from your pictures. Cab moulding, dual tanks, a/c, tilt, carpet, 400 sbc, wood grain trim, etc.
Good luck with it and keep us posted on what else you find out.
Real trucks are built, not bought Build thread

Give me a long enough lever and a place to stand, and I shall move the earth or break this bolt...Whatever, just hold my beer!

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7595
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: New Member
« Reply #2 on: February 09, 2012, 08:07:55 pm »
Welcome from NW Indiana
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: New Member
« Reply #3 on: February 09, 2012, 11:26:03 pm »
     Welcome from California.  We like trucks, but a lot of us like cars too, and looks like you got a couple of nice projects going.
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline DozerMek

  • Newbie
  • Posts: 18
  • Newbie
Re: New Member
« Reply #4 on: February 10, 2012, 12:10:34 pm »
Welcome from Chapman, KS
1982 Silverado K30 454 w/manual 4-speed

"Fork: an instrument used chiefly for putting dead animals into the mouth." - Ambrose Bierce

Offline 1982 Daily Driver

  • Junior Member
  • ***
  • Posts: 549
Re: New Member
« Reply #5 on: February 10, 2012, 12:22:52 pm »
Welcome from South Carolina

Offline Fossil_Fuel

  • New Users
  • Posts: 2
  • Newbie
Re: New Member
« Reply #6 on: February 10, 2012, 12:33:27 pm »
Thanks for the Welcome.

I'm from usually cold/snowy Minnesota but we are having a wimpy winter this year.

I should probably put this in a different section but is there other year grills that are common with my truck?

I never see a '76 listed in any of the catalogs.


Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: New Member
« Reply #7 on: February 10, 2012, 04:38:02 pm »
Thanks for the Welcome.

I'm from usually cold/snowy Minnesota but we are having a wimpy winter this year.

I should probably put this in a different section but is there other year grills that are common with my truck?

I never see a '76 listed in any of the catalogs.
     73-74 grills have the engine size in the lower drivers side, 75-80 I believe is all the same if I remember right.
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline DustyRusty

  • Junior Member
  • ***
  • Posts: 567
Re: New Member
« Reply #8 on: February 10, 2012, 05:50:35 pm »
Welcome from Alaska, Craig.

Rusty
1975 K-10 SWB Fleetside - 350/SM465/NP205/D44F 12-boltR, 3.73 gears.  Original owner.
Customized by rust.