« previous next »
Pages: [1]   Go Down

Author Topic: 89 tbi 350  (Read 2607 times)

Offline 1979C20

  • Senior Member
  • ****
  • Posts: 1659
  • Kyle Taulton.
89 tbi 350
« on: July 26, 2012, 08:39:07 pm »
Can I put an HEI distributor cap and coil on an ESC distributor and have it work the same? Its on an 89 gmc suburban 2500 with a 350. I dont know how the ESC hooks yo the distributor so thats why I am asking if it is possible.
Logged
1979 SCLB C20 Q-jet 350 SM465 14b F.F. 4.10 G80
1989 GMC Suburban V2500 TBI350 TH400 4in lift 35's 14b SF

Offline 454Man

  • Senior Member
  • ****
  • Posts: 1027
  • Why Race?
Re: 89 tbi 350
« Reply #1 on: July 26, 2012, 09:24:10 pm »
Yes this is exactly what I did with my recent build, because I didn't see. The need to buy a new dizzy. There are two wires you splice and join. Then you unplug the esc controller. And you now set the timing
Logged

Offline 1979C20

  • Senior Member
  • ****
  • Posts: 1659
  • Kyle Taulton.
Re: 89 tbi 350
« Reply #2 on: July 26, 2012, 09:38:05 pm »
Wont that throw an esc code?
Logged
1979 SCLB C20 Q-jet 350 SM465 14b F.F. 4.10 G80
1989 GMC Suburban V2500 TBI350 TH400 4in lift 35's 14b SF

Offline 454Man

  • Senior Member
  • ****
  • Posts: 1027
  • Why Race?
Re: 89 tbi 350
« Reply #3 on: July 26, 2012, 10:00:16 pm »
My esc is unplugged and no codes... if you have to worry about emissions. Thenthis may not be for you.someone else may chime in. :-)
Logged

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18461
    • http://www.73-87chevytrucks.com
Re: 89 tbi 350
« Reply #4 on: August 01, 2012, 10:18:59 pm »
no code, here you go:
Logged
Pages: [1]   Go Up
« previous next »