« previous next »
Pages: [1]   Go Down

Author Topic: Door Lock Problem  (Read 11393 times)

Offline sonicbluezx3

  • Registered Users
  • *
  • Posts: 101
Door Lock Problem
« on: September 03, 2012, 08:06:21 pm »
I just replaced the doors on my truck and they did not come with the keys for the door locks. I replaced the handles (pain in the BUTT!) and the locks.... however I am having a problem. I can't turn the key to lock and then pull the key out....... I'm thinking that the piece inside the door isn't lined up right, but I've messed with it and messed with it and I can't figure it out. Does that piece bend or something?

I don't know a better way to describe it... but if I pull the door lock cylinder out of the clip that it goes in to in order to lock/unlock the door, I can pull the door lock knob up and down with no issues. But when I put it together, I can't push the knob down to lock it.

It doesn't look like you can put the clip on the back of the lock cylinder on any other way than the right way, but maybe I'm wrong? Help!
Logged
1986 Chevy K10 w/ 1983 Cab, 1984 Bed, 1987 Doors and a 6.2 Diesel Swap w/ 700R4 Trans. Truck body completely re-done between 2010 and 2012.

Offline 1981Stepside

  • Newbie
  • Posts: 4
Re: Door Lock Problem
« Reply #1 on: September 03, 2012, 09:20:48 pm »
do you have power locks?
Logged

Offline sonicbluezx3

  • Registered Users
  • *
  • Posts: 101
Re: Door Lock Problem
« Reply #2 on: September 03, 2012, 10:26:47 pm »
The doors have them but my truck didnt before i bought the doors. I dont have them wired up... Does having power door locks make a difference?
Logged
1986 Chevy K10 w/ 1983 Cab, 1984 Bed, 1987 Doors and a 6.2 Diesel Swap w/ 700R4 Trans. Truck body completely re-done between 2010 and 2012.

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7595
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: Door Lock Problem
« Reply #3 on: September 03, 2012, 10:50:07 pm »
Sounds like the lock cylinders are reversed to me
Logged
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline sonicbluezx3

  • Registered Users
  • *
  • Posts: 101
Re: Door Lock Problem
« Reply #4 on: September 03, 2012, 11:20:39 pm »
Ill try switching them around..... I didnt even think about that. The lock kit didnt come with the brackets so i couldnt tell which was which. Hopefully that fixes it.
Logged
1986 Chevy K10 w/ 1983 Cab, 1984 Bed, 1987 Doors and a 6.2 Diesel Swap w/ 700R4 Trans. Truck body completely re-done between 2010 and 2012.

Offline jstap

  • Newbie
  • Posts: 15
  • Newbie
Re: Door Lock Problem
« Reply #5 on: November 19, 2012, 07:12:09 pm »
did that fix your problem?  I just replaced mine and it seems like I am having he same problem,I can only unlock the door with the key
but not lock it with the key from outside
Logged

Offline ncguy89

  • Newbie
  • Posts: 74
    • My 4x4 Club
Re: Door Lock Problem
« Reply #6 on: November 21, 2012, 12:17:37 pm »
does your key go in upside down? if so then swap them in the opposite doors.
Logged
1987 v20 - 350 tbi with towing cam, hummer wheels, stock otherwise

1984 chevy c-10 shortbed - kidney foundation truck (for my father)

Offline sonicbluezx3

  • Registered Users
  • *
  • Posts: 101
Re: Door Lock Problem
« Reply #7 on: November 22, 2012, 09:50:11 am »
Sorry I never replied.... I swapped the brackets and everything worked fine.

Of course, now I have a problem with the passenger side. It was working and all of a sudden I can't get it to unlock even with the new locks disconnected. I think there's something going on with the exterior door handle, but I have no idea what. Going to take it to a shop and let them fix it.
Logged
1986 Chevy K10 w/ 1983 Cab, 1984 Bed, 1987 Doors and a 6.2 Diesel Swap w/ 700R4 Trans. Truck body completely re-done between 2010 and 2012.

Offline jstap

  • Newbie
  • Posts: 15
  • Newbie
Re: Door Lock Problem
« Reply #8 on: November 28, 2012, 07:20:32 pm »
I swapped sides and it works fine,I thought I tried that already,, oh well it works now, thanks for the help
Logged
Pages: [1]   Go Up
« previous next »