Author Topic: Steering column interchange.  (Read 6294 times)

Offline 1979C20

  • Senior Member
  • ****
  • Posts: 1659
  • Kyle Taulton.
Steering column interchange.
« on: September 25, 2012, 08:56:43 PM »
I really need to know, before tomorrow, if the steering column from a 94 will work in my 89. From pictures, the wiper stalk looks slightly different and the tilt handle is a little different. But will the shifter linkage, etc work? Its a 94 burb pre vortec, no airbags.
1979 SCLB C20 Q-jet 350 SM465 14b F.F. 4.10 G80
1989 GMC Suburban V2500 TBI350 TH400 4in lift 35's 14b SF

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7549
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: Steering column interchange.
« Reply #1 on: September 25, 2012, 09:08:12 PM »
The shifter linkage will NOT work on our style trucks.  It is completely different...
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline 1979C20

  • Senior Member
  • ****
  • Posts: 1659
  • Kyle Taulton.
Re: Steering column interchange.
« Reply #2 on: September 26, 2012, 01:36:11 AM »
technically, all I need is the upper column tube to work. I can reuse the guts out of my column, the only problem is the retainer shown in this picture. Would I be able to do that?

http://www.fieros.eu/Pics/howto/jmcol/7.jpg

1979 SCLB C20 Q-jet 350 SM465 14b F.F. 4.10 G80
1989 GMC Suburban V2500 TBI350 TH400 4in lift 35's 14b SF

Offline 1979C20

  • Senior Member
  • ****
  • Posts: 1659
  • Kyle Taulton.
Re: Steering column interchange.
« Reply #3 on: September 26, 2012, 01:44:27 AM »
http://0.tqn.com/w/experts/Steering-Column-Repair-2047/2010/01/GM-column_1.gif

Would I be able to reuse everything from my column except for the upper section of the column jacket (#33) which is broken and salvage that part from the new column?
1979 SCLB C20 Q-jet 350 SM465 14b F.F. 4.10 G80
1989 GMC Suburban V2500 TBI350 TH400 4in lift 35's 14b SF