Frame ?'s

[kmanrsss]

Will a fisher plow headgear off an 85 k20 bolt up to the frame of a 78 k30 cre cab?thanks

[Blazin]

I am assuming you mean the plow frame itself, as the head gear is what the lights, and lift piston attach to.
It will bolt on, but you might have to do a bit of trimming to the plow frame around the bump stops, and were the brake like comes throughthe frame and connects to the flex line. I think they are in a shade different place between 80, and 81. I have put plow frames from mid 70's trucks on 81 and up trucks and had to trim them a bit.

[kmanrsss]

Thanks. That's exactly what I meant.

[Tx_Phil]

You guys put plows on your trucks?

You do you use tractors for?   
Pulling hay trailers? 

[kmanrsss]

Tractor plowings too slow, plus my 2wd ford spins too easy pushing a load as I haven't invested in chains yet.

[thirsty]

The tractors are for moving the big snow banks when they get 5-6 feet high around here.

[Tx_Phil]

Snow?  That must be a whole different world up there.

I do feel sorry for you guys up north. We might see snow once every 3-5 years and even that isn't very much. Typically it's gone the next day or a day later.

I guess it balances out. You guys don't typically have the heat we have in the summer or the hurricanes.