« previous next »
Pages: [1]   Go Down

Author Topic: Electric to manual windows  (Read 2761 times)

Offline scotttick

  • Newbie
  • Posts: 7
  • Young Bull
Electric to manual windows
« on: December 14, 2012, 10:13:22 pm »
My passenger door (all manual )was damaged in an accident and I found a donor with electric windows and door locks in it.  Is there anyway to get the manual regulator and lock mech from my original door to replace the electric parts of the new door. If so how tuff of a swap are we talking about. Its a 1987 V10 SWB Custom Deluxe.
Logged

Offline Jason S

  • Senior Member
  • ****
  • Posts: 1561
Re: Electric to manual windows
« Reply #1 on: December 14, 2012, 11:13:25 pm »
The doors from 77-87 (up to 91 on suburbans, blazers and crewcabs) were the same.  If you pull all the parts out of your old door, they will swap into the new doors as long as they are 77-87 (91).

To remove the manual regulators, windows, vent windows, etc. you might try searching this site. I think there have been some posts about the process.
Logged
1973 GMC K2500, Super Custom, Camper Special, 350, TH350, NP203, 4.10's
1974 Chevrolet K10, Custom Deluxe, 350, SM465, NP203, 3.73's

"1) Peace through strength; 2) Trust but verify; 3) Beware of evil in the modern world"

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: Electric to manual windows
« Reply #2 on: December 15, 2012, 08:33:45 am »
Quote from: Jason S on December 14, 2012, 11:13:25 pm
The doors from 77-87 (up to 91 on suburbans, blazers and crewcabs) were the same.  If you pull all the parts out of your old door, they will swap into the new doors as long as they are 77-87.

     Here is a link capt put in the tech section.

http://forum.73-87chevytrucks.com/smforum/index.php/topic,14625.0.html
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom
Pages: [1]   Go Up
« previous next »