« previous next »
Pages: [1]   Go Down

Author Topic: Rear bed molding for K5  (Read 5194 times)

Offline 85 swbchevy

  • Newbie
  • Posts: 7
  • Newbie
Rear bed molding for K5
« on: January 16, 2013, 07:59:07 pm »
Does anyone know if the molding at the rear of the bed, is available for a k5 blazer?  It is the molding that covers the edge of the carpet, at the rear edge. It fastens down with screws. Thanks
Logged

Offline Low87

  • Newbie
  • Posts: 91
Re: Rear bed molding for K5
« Reply #1 on: January 22, 2013, 10:25:24 am »
I couldn't find it in Chris's store, and not in the other 2 catalogs I have.  Might be a scrap yard piece.  The yards around here rarely have k5s but usually have a burb or three.  Might be the same for each.
Logged

Offline Jason S

  • Senior Member
  • ****
  • Posts: 1561
Re: Rear bed molding for K5
« Reply #2 on: January 22, 2013, 09:23:49 pm »
Have you checked with the local Chevrolet dealer?  If they tell you it isn't available, you can use the GM part number from them and search the internet for NOS supplies.
Logged
1973 GMC K2500, Super Custom, Camper Special, 350, TH350, NP203, 4.10's
1974 Chevrolet K10, Custom Deluxe, 350, SM465, NP203, 3.73's

"1) Peace through strength; 2) Trust but verify; 3) Beware of evil in the modern world"

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18467
    • http://www.73-87chevytrucks.com
Re: Rear bed molding for K5
« Reply #3 on: February 18, 2013, 11:26:39 pm »
Ebay or a salvage yard.
Logged
Pages: [1]   Go Up
« previous next »