« previous next »
Pages: [1]   Go Down

Author Topic: Crew Cab SWB Cummins 4X4 Build  (Read 10489 times)

Offline 1HI4x4

  • Registered Users
  • *
  • Posts: 248
  • V30 Crew now a shortbed.....
Crew Cab SWB Cummins 4X4 Build
« on: February 14, 2013, 03:19:08 pm »
Well they all start somewhere and this one starts here, just back it into the garage. 1987 CC Western Hauler 2WD, I will be pulling the bed off, removing the 454/TH400, all the front end, rear end, interior to get ready for the Dodge/Cummins stuff. Monday I will be traveling to IL to get a 1992 Dodge Cummins 4X4 donor truck. Still looking for a SWB if anyone knows where one is within reason.
Logged
1988 V30 Crew Cab, Cummins power, 47RH-NP205, 8" lift, 13.50x35x20 Fuel Mudders on 20x14 XD Diesels -76 offset. Soon to be repainted, seats from a 2010 Lariat to be installed.

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: Crew Cab SWB Cummins 4X4 Build
« Reply #1 on: February 14, 2013, 03:34:51 pm »
     That should be an interesting build.  Have you done this swap before ?  Keep the pics coming and details.
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline 1HI4x4

  • Registered Users
  • *
  • Posts: 248
  • V30 Crew now a shortbed.....
Re: Crew Cab SWB Cummins 4X4 Build
« Reply #2 on: February 14, 2013, 04:58:19 pm »
I built the truck in my avatar, but never was able to get the Cummins installed. You know the story, a guy showed up that wanted it worse than I did. This truck won't leave my garage until it has the Cummins in it.
Logged
1988 V30 Crew Cab, Cummins power, 47RH-NP205, 8" lift, 13.50x35x20 Fuel Mudders on 20x14 XD Diesels -76 offset. Soon to be repainted, seats from a 2010 Lariat to be installed.

Offline frotosride

  • Senior Member
  • ****
  • Posts: 1428
    • WFO CONCEPTS
Re: Crew Cab SWB Cummins 4X4 Build
« Reply #3 on: February 14, 2013, 07:52:19 pm »
Very interested..looking forward to keeping up with his one.
Logged
"Beat it like a red-headed ford"
1987 v10 Silverado(LQ4), 87 R10,83 K20, 83 cucv 6.2 Detroit
2006 Boulevard M109R 109 cid,2019 M109R BOSS
2009 Jeep XK, (future LS Swap)
GSXR 750 engine awaiting go kart

Offline cooleo1122

  • Newbie
  • Posts: 23
  • Newbie
Re: Crew Cab SWB Cummins 4X4 Build
« Reply #4 on: February 14, 2013, 07:53:23 pm »
my buddy is in the process of building 1 of these his is a 79 k30 2wd long bed regular cab 5 speed n cummins in it already done hes doin the little stuff now
runs and drives
Logged

Offline 1HI4x4

  • Registered Users
  • *
  • Posts: 248
  • V30 Crew now a shortbed.....
Re: Crew Cab SWB Cummins 4X4 Build
« Reply #5 on: February 17, 2013, 05:09:14 pm »
 I was able to get the bed loose today just waiting on a buyer to come get it. Got the rear seat out carpet up and rear door panels removed.

Any ideas on sound deadening? This Cummins will need all the help plus some I'm afraid.

Oh we'll felt good to get back in the garage for a day.
Logged
1988 V30 Crew Cab, Cummins power, 47RH-NP205, 8" lift, 13.50x35x20 Fuel Mudders on 20x14 XD Diesels -76 offset. Soon to be repainted, seats from a 2010 Lariat to be installed.

Offline Jason S

  • Senior Member
  • ****
  • Posts: 1561
Re: Crew Cab SWB Cummins 4X4 Build
« Reply #6 on: February 17, 2013, 07:46:28 pm »
Quote
Any ideas on sound deadening? This Cummins will need all the help plus some I'm afraid.

GM had an external firewall cover.  The discussion in the thread below indicates it was limited to Camper Special trucks, but for some reason I seem to recall seeing diesel trucks with the firewall insulation. Of course, they could've been Camper Special diesel trucks...
http://forum.73-87chevytrucks.com/smforum/index.php/topic,20261.msg164821.html#msg164821

Here is a discussion about various insulation types/techniques
http://forum.73-87chevytrucks.com/smforum/index.php/topic,23114.msg192468.html#msg192468

There are quite a few discussions about insulation on the forum that you may want to search through
Logged
1973 GMC K2500, Super Custom, Camper Special, 350, TH350, NP203, 4.10's
1974 Chevrolet K10, Custom Deluxe, 350, SM465, NP203, 3.73's

"1) Peace through strength; 2) Trust but verify; 3) Beware of evil in the modern world"

Offline 1HI4x4

  • Registered Users
  • *
  • Posts: 248
  • V30 Crew now a shortbed.....
Re: Crew Cab SWB Cummins 4X4 Build
« Reply #7 on: February 20, 2013, 06:25:47 pm »
Bed is SOLD and gone....... money for parts :-)
Logged
1988 V30 Crew Cab, Cummins power, 47RH-NP205, 8" lift, 13.50x35x20 Fuel Mudders on 20x14 XD Diesels -76 offset. Soon to be repainted, seats from a 2010 Lariat to be installed.

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: Crew Cab SWB Cummins 4X4 Build
« Reply #8 on: February 21, 2013, 02:33:26 pm »
      Are you keeping the duallies or going with a single axle ?
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline 1HI4x4

  • Registered Users
  • *
  • Posts: 248
  • V30 Crew now a shortbed.....
Re: Crew Cab SWB Cummins 4X4 Build
« Reply #9 on: February 21, 2013, 03:26:24 pm »
It will be a single rear, short wide bed.
Logged
1988 V30 Crew Cab, Cummins power, 47RH-NP205, 8" lift, 13.50x35x20 Fuel Mudders on 20x14 XD Diesels -76 offset. Soon to be repainted, seats from a 2010 Lariat to be installed.

Offline 1HI4x4

  • Registered Users
  • *
  • Posts: 248
  • V30 Crew now a shortbed.....
Re: Crew Cab SWB Cummins 4X4 Build
« Reply #10 on: March 02, 2013, 01:21:07 pm »
Well I got the boat anchor(454) out of it today, now just need to clean up the wiring harness(a bunch), don't need all these stinking wires to make a diesel run.  ;D
Logged
1988 V30 Crew Cab, Cummins power, 47RH-NP205, 8" lift, 13.50x35x20 Fuel Mudders on 20x14 XD Diesels -76 offset. Soon to be repainted, seats from a 2010 Lariat to be installed.

Offline silverj

  • Newbie
  • Posts: 33
Re: Crew Cab SWB Cummins 4X4 Build
« Reply #11 on: October 02, 2013, 09:43:38 pm »
Any progress? Would love to see whats been accomplished!

Sent from my SAMSUNG-SGH-I337 using Tapatalk 4

Logged
87 R20
Pages: [1]   Go Up
« previous next »