All,
I recently did some performance mods on my stock 350 TBI. I went from the stock swirl port cylinder heads (76cc) to a pair of cast iron Engine Quest 903 Votec Hybrid Marine cylinder heads (64cc). I also replaced the OEM intake manifold with a Edelbrock TBI Performer, and I swapped out the lazy stock cam for a Lunati Voodoo Hydraulic Flat Tappet Cam #10120701:
•Advertised Duration (Int/Exh): 256/262
•Duration @ .050 (Int/Exh): 213/219
•Gross Valve Lift (Int/Exh): .454/.468
•LSA/ICL: 112/108
•Valve Lash (Int/Exh): Hyd/Hyd
•RPM Range: 1000-5500
The cam has a slightly noticeable idle and gobs of torque. I also had a custom chip burned for my setup by TBIChips. The truck runs well, overall. My only complaint is that is smells profusely of gasoline when it runs. I mean if I take the truck for a drive, I can smell the exhaust fumes on my clothes when I come inside my house. Is there some kind of sensor or fuel mixture screw (like on traditional carburetors) that can be adjusted to fix this?
Thanks for your help.
1
