« previous next »
Pages: [1]   Go Down

Author Topic: washer hose  (Read 2647 times)

Offline cwilson jr

  • Registered Users
  • *
  • Posts: 197
washer hose
« on: March 29, 2013, 04:39:53 pm »
has anyone had to replace their washer hose through the wiper arm?  i have a cracked hose and can't find anyone that carries that small of hose or line.  the smallest i could find was at the hardware store at 1/8" O.D. and that is too large.
Logged

Offline PromiseKeeper

  • Frequent Member
  • **
  • Posts: 438
Re: washer hose
« Reply #1 on: March 29, 2013, 07:18:33 pm »
try a vacuum line maybe?
Logged
1980 C-10 2WD short & wide. 305 auto.

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: washer hose
« Reply #2 on: March 31, 2013, 08:06:55 pm »
     If your parts store does not have it, go to a dealership, they will more than likely have it in stock or at least can order it.
     The other option, do you have a hose speciality store near you ?  ( near where I live are Delta Rubber and Capital Rubber, just as examples ).
« Last Edit: March 31, 2013, 08:09:19 pm by bake74 »
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline 81_Chevy

  • Frequent Member
  • **
  • Posts: 449
  • A Truck Is Built, Not Bought
Re: washer hose
« Reply #3 on: April 02, 2013, 02:03:34 pm »
i used vacuum line for mine.
Logged
81 Chevy K20 350 4" Rough Country lift ridin on 35's ; 2 12 inch Subwoofers w/ a custom interior

Eagle Scout - 2012 Proud to be one!
Pages: [1]   Go Up
« previous next »