« previous next »
Pages: [1]   Go Down

Author Topic: utility bed  (Read 2620 times)

Offline bigchevyc30

  • Frequent Member
  • **
  • Posts: 456
  • the pig
utility bed
« on: April 17, 2013, 10:43:08 pm »
im looking at trading a guy in my town my Alcoa rims and rear bumper for a utility bed if it will fit and work on my truck since it has the 2 tanks. my question is does anyone have a pick with a dually that has the utility bed on it
Logged
1980 c-30 dually R.I.P
1989 R2500 Sub 350/sm465
1984 k10 sub 6.2/700r4

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7595
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: utility bed
« Reply #1 on: April 18, 2013, 12:56:32 am »
Take careful measurements.  Width and the distance from the cab to the center of the rear wheel.  The beds are specific as to SRW or DRW.
Logged
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline bigchevyc30

  • Frequent Member
  • **
  • Posts: 456
  • the pig
Re: utility bed
« Reply #2 on: April 18, 2013, 01:22:36 am »
well this one came off a dually but idk if ill be doing it cause it was made for a ford so idk if it will have filler spots on both sides of the bed if it dont will deffinitly be a no go cause i want to keep my 2 tank setup
Logged
1980 c-30 dually R.I.P
1989 R2500 Sub 350/sm465
1984 k10 sub 6.2/700r4

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7595
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: utility bed
« Reply #3 on: April 18, 2013, 08:01:53 am »
putting a filler tube in the other side isn't the issue.  The bed has to have the raised compartments on both sides to clear the saddle tanks.
Logged
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/
Pages: [1]   Go Up
« previous next »