Author Topic: Stock 700R4 wiring?  (Read 2629 times)

Offline jaredts

  • Senior Member
  • ****
  • Posts: 1330
Stock 700R4 wiring?
« on: May 16, 2013, 06:48:52 pm »
I can't seem to find a schematic for 700r4 tcc lockup for my '83 c10.  I'm switching from my th350 back to the original 700r4 but the harness from the firewall was cut apparently to get rid of "extra wires."  I think I just need the colors for the low vacuum switch and tcc pigtail.

Offline bd

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 6602
Re: Stock 700R4 wiring?
« Reply #1 on: May 16, 2013, 07:38:51 pm »
Download the 83 Schematic Diagrams from our Tech pages, save it to your hard drive, then look at the bottom of page 16 for reference.  Wire configuration depends on the EGR of all things.
Rich
It's difficult to know just how much you don't know until you know it.
In other words... if people learn by making mistakes, by now I should know just about everything!!!
87 R10 Silverado Fleetside 355 MPFI 700R4 3.42 Locker (aka Rusty, aka Mater)

Offline jaredts

  • Senior Member
  • ****
  • Posts: 1330
Re: Stock 700R4 wiring?
« Reply #2 on: May 16, 2013, 11:38:29 pm »
Thanks, that's exactly what I needed.