Author Topic: carb flooding at random times  (Read 4713 times)

Offline rolls royce

  • New Users
  • Posts: 2
  • Newbie
carb flooding at random times
« on: October 20, 2013, 08:07:47 am »
i have a 84 c10 with a 355 sbc 400 turbo trans with a edelbrock 600 and at random times the truck will start to flood when stopping or turning at random times if the engine cuts off it takes forever for it to start again
« Last Edit: October 20, 2013, 08:20:43 am by rolls royce »

Offline rich weyand

  • Senior Member
  • ****
  • Posts: 1391
Re: carb flooding at random times
« Reply #1 on: October 20, 2013, 08:26:43 am »
This will happen if the floats are adjusted incorrectly and the fuel level in the float bowl is therefore too high.  One fellow on another forum said he has never seen an Edelbrock's floats properly adjusted, new from the factory.  I checked mine and yep, not correctly adjusted.  I think they can go out of adjustment in shipping.  Anyway, you need to adjust the floats.  This involves taking off the top cover on the carburetor.  It is not particularly difficult to do.

Instructions are here, on page 8: http://www.edelbrock.com/automotive_new/mc/carbs_acc/pdf/carb_owners_manual.pdf

You need these: http://www.jegs.com/i/Edelbrock/350/1499/10002/-1
Rich

"Working Girl": 1978 K-10 RCSB 350/TH350/NP203 +2/+3 Tuff Country lift

Offline rolls royce

  • New Users
  • Posts: 2
  • Newbie
Re: carb flooding at random times
« Reply #2 on: October 20, 2013, 08:39:25 am »
im currently overseas serving and my dad is driving my truck so i will tell him and see if that fixes it thanks for the info