« previous next »
Pages: [1]   Go Down

Author Topic: Disc break conversion  (Read 4327 times)

Offline 76 Scotty

  • Newbie
  • Posts: 3
  • Newbie
Disc break conversion
« on: November 04, 2013, 07:42:18 pm »
I have a 76 Scottsdale C10 with stock 454 and I'm doing a frame off rebuild and I was wondering if any of you guys knew where I could get a conversion kit for disc brakes in the rear since it has drums right now.

Any help is appreciated!
Logged

Offline Engineer

  • Senior Member
  • ****
  • Posts: 1402
Re: Disc break conversion
« Reply #1 on: November 05, 2013, 07:22:20 am »
I fabbed my own on my '77's 14-bolt.

I have seen the weld on brackets on eBay. I prefer the bolt on type so if you want to return your axle to stock you can.
Logged
2002 Chevy 2500HD 4x4 8.1/ZF6sp RC/LB
2001 Chevy 2500HD 4x4 6.0/4L85E EC/SB
1997 Chevy Blazer 4x4
1994 Chevy K-2500 4x4 C6P 5.7/4L80E
1979 Chevy K-30 4x4 4sp 4.10
1977 Chevy K-30 4x4 4sp 4.10 454

Dad of an Eagle Scout, and a Life Scout

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: Disc break conversion
« Reply #2 on: November 06, 2013, 01:42:22 am »
i would find out what axle you have then do a search on ebay for the kit. and go from there
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline 1982 Daily Driver

  • Junior Member
  • ***
  • Posts: 549
Re: Disc break conversion
« Reply #3 on: November 06, 2013, 04:31:22 am »
Their is a company called Right Stuff that sells the conversion. I used it on my 82 c-10 and they work really well.
Logged

Offline 76 Scotty

  • Newbie
  • Posts: 3
  • Newbie
Re: Disc break conversion
« Reply #4 on: November 06, 2013, 02:56:36 pm »
Ok thanks guys.
Logged
Pages: [1]   Go Up
« previous next »