has anyone used the DJM spindals?

[1bad72]

Looking for a set of drop spindles and was wondering if anyone has used the Djm 3" drop spindles and if they liked them. I'm liking to go 4 or 5" in the front with a flip kit in the rear but my truck was a v6 truck so we will see once the ls moter is set in place ho it looks.

[Rich84]

The DJM spindles are fine..I did mine about 2 years ago, no problems. Had to clearance the caliper a bit and should do the lower control arm as well. I would stay away from their flip kit if you were looking at it, heard of problems with it on another board.

[bake74]

     http://forum.73-87chevytrucks.com/smforum/index.php?topic=23608.msg199289#msg199289

[1bad72]

Thanks , I plan on making my own flip kit it is getting a 4/6 drop. I just wasn't sure if DJM made good spindles or not.

[Captkaos]

I have used spindles from just about every manufacturer out there.  I have had no issues with any of them.  On certain drop amounts you WILL most likely have to clearance your control arms if using 15" wheels (some 2.5" and 3" spindles)
This includes BellTech, DJM, Western and AIM...