« previous next »
Pages: [1]   Go Down

Author Topic: Aftermarket 15" Wheels and 3" Drop Spindles  (Read 3454 times)

Offline hobbz

  • Registered Users
  • *
  • Posts: 116
Aftermarket 15" Wheels and 3" Drop Spindles
« on: January 15, 2014, 07:39:34 pm »
I am planning on going with 15" Cragar SS Classic style wheel, but want to make sure that they will work with 3" drop spindles.  Will I have to trim the lower a arm?

Logged
1987 Chevy R10 Short/Step -  350/th350
Build Thread

Offline SNWBLL

  • Newbie
  • Posts: 63
Re: Aftermarket 15" Wheels and 3" Drop Spindles
« Reply #1 on: January 16, 2014, 08:19:22 am »
My 15x8's fit with 3" belltechs, but it's really really close. I'll try to get a picture and post it.
Logged
Mike
85 longbed
86 shortbed

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18461
    • http://www.73-87chevytrucks.com
Re: Aftermarket 15" Wheels and 3" Drop Spindles
« Reply #2 on: January 18, 2014, 02:23:00 pm »
depends on the inside lip design and backspacing.  Typically you will have to..
Logged
Pages: [1]   Go Up
« previous next »