« previous next »
Pages: [1]   Go Down

Author Topic: moldings  (Read 3126 times)

Offline bob75

  • Newbie
  • Posts: 18
  • Newbie
moldings
« on: March 20, 2014, 11:31:11 pm »
getting ready to start the body on a 75 shortbed and had a thought about using 3M emblem tape instead of the stock clips for the moldings...anyone try this or any input
Logged

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: moldings
« Reply #1 on: March 20, 2014, 11:59:23 pm »
idk if it will hold up to the weather. we just got done working on a car trailer, it had trim held on by 3m tape. needless to say the trim didnt come off real easy had to use a razor blade and a real knife to cut it off, and the guy is going to have to buy new stuff
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline LTZ C20

  • Senior Member
  • ****
  • Posts: 3795
  • "I'm here for a good time" -George Strait
Re: moldings
« Reply #2 on: March 21, 2014, 12:50:30 am »
It works pretty good. I used it to put the "CHEVROLET" back on my tailgate trim. That was 2/12 years ago or so. Through all the washes, rain, wind, sun and even a vandalism, it's still there. No peeling or separation. I used regular 3M outdoor double sided adhesive tape. Wasn't even there automotive stuff.




Logged
LTZ Cheyenne C20

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: moldings
« Reply #3 on: March 21, 2014, 05:36:42 pm »
     Just make sure the surfaces are prepped properly and that stuff sticks pretty good.
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline LTZ C20

  • Senior Member
  • ****
  • Posts: 3795
  • "I'm here for a good time" -George Strait
Re: moldings
« Reply #4 on: March 21, 2014, 07:19:09 pm »
Ditto ^^^




Logged
LTZ Cheyenne C20
Pages: [1]   Go Up
« previous next »