« previous next »
Pages: [1]   Go Down

Author Topic: Axles  (Read 3435 times)

Offline kodalee

  • Newbie
  • Posts: 51
  • Newbie
Axles
« on: May 21, 2014, 08:16:06 pm »
I have an 85 k10 with a built 350 and built turbo 350. what axles and gears should i run.
Logged

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7595
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: Axles
« Reply #1 on: May 21, 2014, 08:27:11 pm »
It depends on tire size and how you are going to use the truck.  Need more info
Logged
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline pholliday1

  • Junior Member
  • ***
  • Posts: 632
  • 1990 V3500 Crew Cab
Re: Axles
« Reply #2 on: May 22, 2014, 08:12:16 am »
What's your definition of "built" ? Fill in the blanks we'll fill in the answers!
Logged
VETERAN AND LIFETIME NRA MEMBER. WHAT DO YOU STAND FOR?
1991 V3500 CREWCAB SRW 454TBI GMC
1991 v3500 crewcab SRW 454tbi 480le 6" lift
1990 V3500 crewcab Dana 60 FF 14b 5:38 ratio 40 inch 11" lift
1989 v3500 crewcab 454TBI 5" lift

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: Axles
« Reply #3 on: May 22, 2014, 08:39:07 pm »
Quote from: zieg85 on May 21, 2014, 08:27:11 pm
It depends on tire size and how you are going to use the truck.  Need more info

     X2
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline kodalee

  • Newbie
  • Posts: 51
  • Newbie
Re: Axles
« Reply #4 on: May 22, 2014, 08:45:09 pm »
sorry about that i want to fun 40s and will be 90% off road toy
the 350 will have the edelbrock top end kit on it.
the turbo 350 has Kevlar clutches and a competition shift kit installed
Logged

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7595
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: Axles
« Reply #5 on: May 22, 2014, 08:53:18 pm »
4.56 or lower
Logged
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: Axles
« Reply #6 on: May 22, 2014, 10:55:45 pm »
what zieg said. 4.56 for a toy. you will prob get about 6 mpgs but she will have no problem on in the pit. i know my truck would be screaming going 65-70 i have 38s and 4.10 yours should start to scream about there, 50mph you will be turning 2k
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline LeftysRodandCustom

  • Newbie
  • Posts: 72
  • Newbie
Re: Axles
« Reply #7 on: May 23, 2014, 01:29:57 am »
For about $260 you cant beat a set of moser engineering axles.
Logged

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: Axles
« Reply #8 on: May 23, 2014, 03:56:50 am »
never heard of them, but upon searching their website i couldn't find anything for ¾ton only ½ton
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline pholliday1

  • Junior Member
  • ***
  • Posts: 632
  • 1990 V3500 Crew Cab
Re: Axles
« Reply #9 on: May 28, 2014, 09:22:52 am »
I run 40's 5.38's and a big block you want a deep gear with 40's trust me, unless you want to be in 4lo all the time off road.
Logged
VETERAN AND LIFETIME NRA MEMBER. WHAT DO YOU STAND FOR?
1991 V3500 CREWCAB SRW 454TBI GMC
1991 v3500 crewcab SRW 454tbi 480le 6" lift
1990 V3500 crewcab Dana 60 FF 14b 5:38 ratio 40 inch 11" lift
1989 v3500 crewcab 454TBI 5" lift
Pages: [1]   Go Up
« previous next »