« previous next »
Pages: [1]   Go Down

Author Topic: Will these fit a 75 k20  (Read 5511 times)

Offline Dan75k20

  • Frequent Member
  • **
  • Posts: 269
  • Newbie
Will these fit a 75 k20
« on: May 26, 2014, 07:37:49 pm »
Thinking about a set of this type of wheel fit a 75 k20

Sent from my Nexus 5 using Tapatalk

Logged

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7595
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: Will these fit a 75 k20
« Reply #1 on: May 26, 2014, 08:54:15 pm »
Logged
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: Will these fit a 75 k20
« Reply #2 on: May 27, 2014, 10:37:41 am »
Quote from: zieg85 on May 26, 2014, 08:54:15 pm
http://www.ebay.com/itm/5297-5298-Chevy-GMC-2500-3500-17-Factory-OEM-Wheel-Rim-1-A-/281269986528

Based on the advertised bolt pattern I would say yes

     Zieg, that link you gave, if you use "compatibility"  feature on the bottom for a 75 K20, it say's it does not fit.  Though I am not sure how well I trust those things.

"Compatibility
   
This part is not compatible with 1975 Chevrolet K20."

     But if your bolt pattern is 8x6.5 then it should fit like zieg said.
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline Dan75k20

  • Frequent Member
  • **
  • Posts: 269
  • Newbie
Re: Will these fit a 75 k20
« Reply #3 on: May 27, 2014, 11:44:38 am »
Guy wants 300 for them and I am buying some skinnier tires figure I can get a mpg or so and they will update the look of the truck

Sent from my Nexus 5 using Tapatalk

Logged

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: Will these fit a 75 k20
« Reply #4 on: May 27, 2014, 11:19:48 pm »
you can use up to 2010, in 2011 they changed to 8x80mm on single axle and 8x210mm on dually. this was so they can up the GVW, FAWR, and towing capacity
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7595
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: Will these fit a 75 k20
« Reply #5 on: May 28, 2014, 05:41:02 am »
Quote from: bake74 on May 27, 2014, 10:37:41 am
Quote from: zieg85 on May 26, 2014, 08:54:15 pm
http://www.ebay.com/itm/5297-5298-Chevy-GMC-2500-3500-17-Factory-OEM-Wheel-Rim-1-A-/281269986528

Based on the advertised bolt pattern I would say yes

     Zieg, that link you gave, if you use "compatibility"  feature on the bottom for a 75 K20, it say's it does not fit.  Though I am not sure how well I trust those things.

"Compatibility
   
This part is not compatible with 1975 Chevrolet K20."

     But if your bolt pattern is 8x6.5 then it should fit like zieg said.

Never concern myself with the small stuff.  17" never came in a K20 in 75 and Walmart wouldn't sell you tires because the book says 7.50x16 or 8.75x16.5...  The bolt pattern is what is important
Logged
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline Dan75k20

  • Frequent Member
  • **
  • Posts: 269
  • Newbie
Re: Will these fit a 75 k20
« Reply #6 on: May 29, 2014, 10:06:50 pm »
I buy tires from ntwonline.com don't need to worry about Walmart.  Dukes tires in south side  they will install any size that will fit! Good old local tire shop

Sent from my Nexus 5 using Tapatalk
Logged

Offline jumpkickyergunt

  • Newbie
  • Posts: 89
  • Newbie
Re: Will these fit a 75 k20
« Reply #7 on: May 30, 2014, 12:48:21 am »
Agreed. Check centerbore and backspace.
Logged
Pages: [1]   Go Up
« previous next »