Author Topic: New member with '84 K30  (Read 4383 times)

Offline Turbostang7

  • Newbie
  • Posts: 4
  • Newbie
New member with '84 K30
« on: June 11, 2014, 07:05:15 pm »
Hey guys,
First off thanks for approving lol. I have always had a soft spot for these trucks as it was the only vehicle I remember my dad ever driving lol. So when he passed a few years ago I wanted to get me one.
Recently found an '84 K30 dana 60/14 bolt (4:10 ratio) truck came with a 454/th400 combo with the 205 transfer case. Silverado with everything but AC on it. Black.
I was working in North Dakota when I found it in Utah, the guy said it was all good to go (I know better than to buy vehicles sight unseen but wanted this one lol) so my wife had him deliver it up to Idaho and paid $3400 for it (I know it's high)
I got home and the truck didn't even want to start. I rebuilt the quadrajet, tuned it up, changed all fluids front to back but the engine still missed and had low power, compression ended up being around 90 in two cylinders.
So I sourced a 1997 vortec 454 swapped the carb on it and threw that in and it runs much better now but steering was horrible at best, swapped everything out from steering box to tires. Now it drives much better.

Looking forward to learning from this forum in the certain things that work well on these old trucks.

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: New member with '84 K30
« Reply #1 on: June 11, 2014, 09:00:01 pm »
     Welcome to the site from California.  Nice truck to start with.
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: New member with '84 K30
« Reply #2 on: June 11, 2014, 10:56:13 pm »
welcome from maryland
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7595
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: New member with '84 K30
« Reply #3 on: June 12, 2014, 11:00:37 am »
Welcome from NW Indiana
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline DustyRusty

  • Junior Member
  • ***
  • Posts: 567
Re: New member with '84 K30
« Reply #4 on: June 12, 2014, 04:08:36 pm »
Welcome from Alaska.  Sounds like a great truck.  Post up some pics when you have time.  We all like pics!
1975 K-10 SWB Fleetside - 350/SM465/NP205/D44F 12-boltR, 3.73 gears.  Original owner.
Customized by rust.

Offline dvdswan

  • Frequent Member
  • **
  • Posts: 486
  • Newbie
Re: New member with '84 K30
« Reply #5 on: June 20, 2014, 08:11:57 pm »
welcome from the PNW.

Offline Turbostang7

  • Newbie
  • Posts: 4
  • Newbie
Re: New member with '84 K30
« Reply #6 on: June 22, 2014, 06:44:49 pm »
Thanks for all the welcomes! When I get back home I will post up some pics of her

Offline blazing816

  • Frequent Member
  • **
  • Posts: 391
  • A Truck Is Built, Not Bought
Re: New member with '84 K30
« Reply #7 on: June 23, 2014, 09:16:59 am »
welcome from Michigan
-----------------------------
1988 Chevy R20 Scottsdale Crew Cab (350/TH400/4.56)

Offline pholliday1

  • Junior Member
  • ***
  • Posts: 632
  • 1990 V3500 Crew Cab
Re: New member with '84 K30
« Reply #8 on: June 23, 2014, 11:47:42 am »
Welcome from upstate NY.. A good upgrade for your font dana 60 is to replace the upper king pin springs they often can become weak and lead to tire shimmy. I would make sure that you by springs from spicer and you can pick them up right on ebay.
VETERAN AND LIFETIME NRA MEMBER. WHAT DO YOU STAND FOR?
1991 V3500 CREWCAB SRW 454TBI GMC
1991 v3500 crewcab SRW 454tbi 480le 6" lift
1990 V3500 crewcab Dana 60 FF 14b 5:38 ratio 40 inch 11" lift
1989 v3500 crewcab 454TBI 5" lift

Offline Turbostang7

  • Newbie
  • Posts: 4
  • Newbie
Re: New member with '84 K30
« Reply #9 on: June 24, 2014, 06:45:48 pm »
Thanks! Already did the kingpins, she had death wobble something fierce when I first got it, now it's just a slight shimmy (tires I believe) [/URL][/img]