« previous next »
Pages: [1]   Go Down

Author Topic: Th350 tailshaft housing bolts  (Read 3269 times)

Offline hobbz

  • Registered Users
  • *
  • Posts: 116
Th350 tailshaft housing bolts
« on: January 13, 2015, 01:06:56 pm »
Does anyone know the size of the bolts that hold the tailshaft housing to the back of the transmission?
Logged
1987 Chevy R10 Short/Step -  350/th350
Build Thread

Offline hobbz

  • Registered Users
  • *
  • Posts: 116
Re: Th350 tailshaft housing bolts
« Reply #1 on: January 14, 2015, 03:02:20 pm »
Anyone?
Logged
1987 Chevy R10 Short/Step -  350/th350
Build Thread

Offline HAULIN IT

  • Senior Member
  • ****
  • Posts: 1542
Re: Th350 tailshaft housing bolts
« Reply #2 on: January 14, 2015, 11:37:55 pm »
They are 3/8"...as for the length, I can't tell you exactly. Slide a small screwdriver in the hole with the extension on the trans, mark it & subtract a 1/4" or go to the store & grab a handfull of grade 5 3/8" bolts 1" long (too short) to 2 1/2" (too long) & use the correct ones...someday you'll be doing another project & be glad you have the extra bolts handy. Lorne
Logged

Offline hobbz

  • Registered Users
  • *
  • Posts: 116
Re: Th350 tailshaft housing bolts
« Reply #3 on: January 15, 2015, 04:44:22 am »
Cool. Thanks for the help.
Logged
1987 Chevy R10 Short/Step -  350/th350
Build Thread
Pages: [1]   Go Up
« previous next »