Author Topic: I need help on my 86 c10  (Read 4649 times)

Offline william.hiser.77

  • Newbie
  • Posts: 3
  • Newbie
I need help on my 86 c10
« on: February 23, 2015, 11:54:57 pm »
Recently my 86 c10 has started having problems making right turns, it's making a popping noise and won't make a tight right turn!!
What could be the problem ??

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: I need help on my 86 c10
« Reply #1 on: February 24, 2015, 10:10:44 am »
cracked frame at the steering box?
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline william.hiser.77

  • Newbie
  • Posts: 3
  • Newbie
Re: I need help on my 86 c10
« Reply #2 on: February 24, 2015, 12:01:55 pm »
I don't think so, it's inly when I turn right, and it came on all of the sudden!
There's been no damage to the truck

Offline william.hiser.77

  • Newbie
  • Posts: 3
  • Newbie
Re: I need help on my 86 c10
« Reply #3 on: February 24, 2015, 12:18:59 pm »
I was thinking it could possibly be my steering pump or my ball joints, but I'm looking for a couple second opinions

Offline jumbowolfe

  • Newbie
  • Posts: 47
  • Newbie
    • Vintage Kramer DOT com
Re: I need help on my 86 c10
« Reply #4 on: February 27, 2015, 07:50:01 am »
If your ball joints are ancient, I would most certainly start there and the tie rods.  I had this happen on my Mustang and they were the culprit.

It never hurts to install new ones anyway, albeit, pain in the butt.


1978 Chevy 4x4 SWB K10 - Yeller 2 - Currently Owned
1978 Chevy 4x4 SWB K10 - Yeller - Sold in 1989, regretted it every day since.

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7595
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: I need help on my 86 c10
« Reply #5 on: February 27, 2015, 08:00:56 am »
Right turn would be effected if the frame was cracked more and left turns should be normal until it completely goes
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline roundhouse

  • Senior Member
  • ****
  • Posts: 1474
  • Newbie
Re: I need help on my 86 c10
« Reply #6 on: February 27, 2015, 08:06:04 am »
I wouldn't drive it anymore till you figure it out though



Sent from my iPhone using Tapatalk

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: I need help on my 86 c10
« Reply #7 on: February 27, 2015, 11:16:42 pm »
Right turn would be effected if the frame was cracked more and left turns should be normal until it completely goes
I don't think so, it's inly when I turn right, and it came on all of the sudden!
There's been no damage to the truck
think or know?

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline FlatBlack77

  • Junior Member
  • ***
  • Posts: 894
  • Cheap Fast Reliable - Pick 2
Re: I need help on my 86 c10
« Reply #8 on: February 28, 2015, 05:58:35 am »
i had the same problem in my 79 K10. it was really hard to steer to the right and it would pop loudly and kinda "break free" mid turn. it was the ball joints. and it happend on a 12 mile drive. left without a problem, made a few turns, and by the time i got home it wasnt safe to drive again till it was fixed
"When you are a hammer, everything looks like a nail"
'77 C/10 - 350/350 mild street motor