« previous next »
Pages: [1]   Go Down

Author Topic: Hoop steps  (Read 3993 times)

Offline 2butterbeans

  • Newbie
  • Posts: 3
  • Newbie
Hoop steps
« on: May 03, 2015, 06:31:16 pm »
I just bought a used set of hoop steps for my 86 k10 with dual tanks and I don't know where the steps go on the rocker panel. Am I to take the tank down on each side ? If I put them at the end of the tank will they be to far forward? I did not get any instructions with the steps. They would tell me how many inches from the back or front to mount them. I don't what to sound so stupid but I don't want to put them in the wrong place to look wrong or not able to use them. Thank you guys for any help
Logged

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: Hoop steps
« Reply #1 on: May 03, 2015, 08:10:13 pm »
cant help out with numbers
but you can look at this truck and get an ideal

http://forum.73-87chevytrucks.com/smforum/index.php?topic=25678.165
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline Gusgusa1

  • Newbie
  • Posts: 96
  • Gasket
Re: Hoop steps
« Reply #2 on: June 09, 2015, 08:45:56 pm »
Irish where did you get those flares? Do you have them on the back? If you do can I see a pic? Been contemplating them on my white truck.
Logged
2002 gmc 1500hd 6.0 4x4
1987 gmc Sierra classic 1500 350ss 4x4
1986 silverado 350 4x4
1984 scottsdale 305 quad jet 4x4 4spd manual
1982 camaro z28 350 w vortec heads spool

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: Hoop steps
« Reply #3 on: June 09, 2015, 09:01:04 pm »
not mine but eric28miller's click the link on the bottom of the picture
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline roundhouse

  • Senior Member
  • ****
  • Posts: 1474
  • Newbie
Re: Hoop steps
« Reply #4 on: June 10, 2015, 09:35:21 pm »
We installed some generic hoop steps we bought at a auto parts store
You can do it without dropping the tank

There is one small sheet metal screw that won't fit
Cause he tank blocks it.   But it doesn't support any weight
Don't know why it is on there anyway


Sent from my iPhone using Tapatalk
Logged
Pages: [1]   Go Up
« previous next »