« previous next »
Pages: [1]   Go Down

Author Topic: Replacement Fuel Hose Length  (Read 2324 times)

Offline jn3825

  • Newbie
  • Posts: 6
  • Newbie
Replacement Fuel Hose Length
« on: April 22, 2016, 03:02:08 pm »
So I am putting an aftermarket TBI setup on my '78 k10 stepside and I am trying to figure out how much fuel hose I will need to buy. My truck is out of state and I want to have everything bought, as much as possible, when I go to put it together.

I was thinking that getting a 15' hose would be enough to run both the supply and return lines at 7.5' each. I'm only going to run the drivers side tank for now. I just don't want to come up short.


What length of fuel hose will I need?
« Last Edit: April 22, 2016, 03:06:08 pm by jn3825 »
Logged

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: Replacement Fuel Hose Length
« Reply #1 on: April 23, 2016, 07:19:42 am »
what lines does it have now? i would op for fuel lines over a hose, unless yours is so bad off you cant reuse it.
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline jn3825

  • Newbie
  • Posts: 6
  • Newbie
Re: Replacement Fuel Hose Length
« Reply #2 on: April 25, 2016, 05:05:55 pm »
I imagine it has the stock lines but I haven't had a chance to drop the tanks yet. I am going to a high pressure in tank pump so I would like to replace all the lines. I am thinking I will probably run either braided stainless hose or make up some new steel lines. Either way I need to know how long of a run I will need.
Logged
Pages: [1]   Go Up
« previous next »