I have reinstalled the 350 in my 77 K10 and so far I have only discovered one thing that I lost since I pulled it last fall. I can't find the (excuse me if I get the nomenclature wrong) rear upper bracket that bolts to the block and exhaust manifold and the Power Steering Pump. I looked online and can't find one which is ok I guess because future plans will probably include headers and I don't think that bracket will work with headers. But there are a ton of replacement brackets options and "mounting systems" for Power Steering Pumps. Does anyone have a recommendation on an inexpensive after market bracket or have an old stock bracket they are not too attached to?
Also, when I asked last fall about using some Ram Horn exhausts on my truck it was suggested I would have clearance problems. Just for grins I stuck the ram horns on and it doesn't look like i would have any issues. I have not spent a lot of time on it because this time I am going to change as little from stock as possible but down the road I might use them. Is there some clearance issue that I just didn't see?
Thanks!
1
