« previous next »
Pages: [1]   Go Down

Author Topic: This is dumb but…  (Read 3324 times)

Offline Stm3784

  • Newbie
  • Posts: 16
  • Newbie
This is dumb but…
« on: October 27, 2016, 09:29:02 pm »
Hi so I had posted about a core support panel earlier. The panel bolt to the core support and goes back toward th motor. In any case I posted a picture from  , and it stated that the panel was for trucks with automatics. My build is a 78 K20 350 4 spd. The question I asked was if this panel would be sufficient in my truck. I got 1 reply and the post vanished? Can anyone 1 let me know if I can use that panel, 2 why the post disappeared?

Thanks

Attached is the picture of the panel I speak of.
« Last Edit: October 28, 2016, 12:39:45 am by Irish_Alley »
Logged

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: This is dumb but…
« Reply #1 on: October 28, 2016, 12:42:57 am »
Your picture was removed due to being a screenshot of a company that's not allowed to be mentioned on this site due to a few reasons one being g they're competition for the owner of this site. He sells a lot of stuff that pays for this form to run.
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline Engineer

  • Senior Member
  • ****
  • Posts: 1402
Re: This is dumb but…
« Reply #2 on: October 28, 2016, 09:32:27 am »
Quote from: Irish_Alley on October 28, 2016, 12:42:57 am
Your picture was removed due to being a screenshot of a company that's not allowed to be mentioned on this site due to a few reasons one being g they're competition for the owner of this site. He sells a lot of stuff that pays for this form to run.

That, and said company was given an offer to advertise on here and refused.
Logged
2002 Chevy 2500HD 4x4 8.1/ZF6sp RC/LB
2001 Chevy 2500HD 4x4 6.0/4L85E EC/SB
1997 Chevy Blazer 4x4
1994 Chevy K-2500 4x4 C6P 5.7/4L80E
1979 Chevy K-30 4x4 4sp 4.10
1977 Chevy K-30 4x4 4sp 4.10 454

Dad of an Eagle Scout, and a Life Scout

Offline Engineer

  • Senior Member
  • ****
  • Posts: 1402
Re: This is dumb but…
« Reply #3 on: October 28, 2016, 09:41:18 am »
Quote from: Stm3784 on October 27, 2016, 09:29:02 pm
Hi so I had posted about a core support panel earlier. The panel bolt to the core support and goes back toward th motor. In any case I posted a picture from  , and it stated that the panel was for trucks with automatics. My build is a 78 K20 350 4 spd. The question I asked was if this panel would be sufficient in my truck. I got 1 reply and the post vanished? Can anyone 1 let me know if I can use that panel, 2 why the post disappeared?

Thanks

Attached is the picture of the panel I speak of.

Automatic/manual it doesn't matter the plate for the radiator is specific to the radiator. The cooler for the automatic transmission is in the passenger side tank and is not used if you have a manual. If you have a factory manual truck the original radiator won't have the cooler. However, I don't know of too many replacement radiators that do not have the cooler. You just simply ignore the cooler connections for your 4-sp truck. When I build a 73~87 I look for a 4-core radiator and use the corresponding plate. (This most likely will be the automatic application) The bigger problem is if your 73~80 came with a 6 cylinder engine it is likely to have the 17" core radiator and the 19" core radiator won't work because the nutserts won't be on the top of the radiator support to use the 19" radiator plate.
« Last Edit: October 28, 2016, 09:47:50 am by Engineer »
Logged
2002 Chevy 2500HD 4x4 8.1/ZF6sp RC/LB
2001 Chevy 2500HD 4x4 6.0/4L85E EC/SB
1997 Chevy Blazer 4x4
1994 Chevy K-2500 4x4 C6P 5.7/4L80E
1979 Chevy K-30 4x4 4sp 4.10
1977 Chevy K-30 4x4 4sp 4.10 454

Dad of an Eagle Scout, and a Life Scout

Offline Stm3784

  • Newbie
  • Posts: 16
  • Newbie
Re: This is dumb but…
« Reply #4 on: October 28, 2016, 03:23:49 pm »
Quote from: Irish_Alley on October 28, 2016, 12:42:57 am
Your picture was removed due to being a screenshot of a company that's not allowed to be mentioned on this site due to a few reasons one being g they're competition for the owner of this site. He sells a lot of stuff that pays for this form to run.

My sincere apology to the members and owner. I was unaware.
Logged
Pages: [1]   Go Up
« previous next »