Author Topic: Will these fit?  (Read 5944 times)

Offline chiefmiller84

  • Newbie
  • Posts: 74
  • Newbie
Will these fit?
« on: January 26, 2017, 02:31:38 pm »
I have an 83 c10


Sent from my iPhone using Tapatalk

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: Will these fit?
« Reply #1 on: January 26, 2017, 02:36:52 pm »
Wheel Tech & OEM bolt pattern
but short answer is yes. if you look on that list you will see jeep has a few bolt patterns also
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline chiefmiller84

  • Newbie
  • Posts: 74
  • Newbie
Re: Will these fit?
« Reply #2 on: January 26, 2017, 02:41:52 pm »
Thanks bud!


Sent from my iPhone using Tapatalk

Offline m3talc0re

  • Registered Users
  • *
  • Posts: 174
  • Newbie
    • Burning Concept
Re: Will these fit?
« Reply #3 on: January 26, 2017, 03:11:52 pm »
Jeep rims like these had me wondering too. Same bolt pattern, I just don't know about the offset

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: Will these fit?
« Reply #4 on: January 26, 2017, 03:51:47 pm »
idk about the offset. but people put the 8 and 6 lugs from 2000s on without issue and they have what looks about the same offset
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline FlatBlack77

  • Junior Member
  • ***
  • Posts: 894
  • Cheap Fast Reliable - Pick 2
Re: Will these fit?
« Reply #5 on: January 26, 2017, 04:56:28 pm »
I would be worried about the hub bore size. not sure it would be big enough
"When you are a hammer, everything looks like a nail"
'77 C/10 - 350/350 mild street motor

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: Will these fit?
« Reply #6 on: January 26, 2017, 05:47:16 pm »
another good point
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline m3talc0re

  • Registered Users
  • *
  • Posts: 174
  • Newbie
    • Burning Concept
Re: Will these fit?
« Reply #7 on: January 26, 2017, 06:18:26 pm »
I forgot about that

Offline m3talc0re

  • Registered Users
  • *
  • Posts: 174
  • Newbie
    • Burning Concept
Re: Will these fit?
« Reply #8 on: January 27, 2017, 09:08:51 pm »
I don't think they'll fit. Jeep's bore size is too small.

Chevy/GMC info: http://www.wheelsupport.com/chevrolet-gmc-bolt-pattern/

Jeep info: http://www.wheelsupport.com/?s=Jeep

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: Will these fit?
« Reply #9 on: January 28, 2017, 07:08:57 am »
78.3 mm vs 71.5mm

on a side not i found this
Wheel Bolt Pattern Cross Reference Database and Conversion
http://www.roadkillcustoms.com

you enter in the lug pattern youre looking for and it will tell you other cars/trucks that have the same lugs but again you have to pay attention to the hub size
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18461
    • http://www.73-87chevytrucks.com
Re: Will these fit?
« Reply #10 on: February 06, 2017, 10:41:28 pm »
They won't fit.  there were question on this just recently.  My wife owns a JK and we still have her take off's...