« previous next »
Pages: [1]   Go Down

Author Topic: front leaf hangers/body mount  (Read 7177 times)

Offline big_al273

  • Registered Users
  • *
  • Posts: 207
  • Newbie
front leaf hangers/body mount
« on: May 13, 2017, 08:11:56 pm »
are the front leaf hangers/body mounts the same from k10 through k30 or is it like the frames where the material is thicker on the heavier model? i'm asking because i have a 4x4 1 ton drive line and a 2wd truck i'm looking at putting it in however the hangers on the donor truck are quite heavily rusted to the point i don't think they are road worthy, so i need to find out if i can simply get any K series front leaf hangers/body mounts or if i need to look for K30 1 ton stuff. To be clear i am referring to the front spring hangers that are integral to the rad cradle body mounts
Logged
91 Chevy R3500 Crewcab future project
89 GMC R3500 Cab & Chassis Tool truck project
88 Chevy V30 Crewcab Ex-firetruck
87 Chevy R20 Crewcab future project
84 GMC K1500 winter beater

Offline big_al273

  • Registered Users
  • *
  • Posts: 207
  • Newbie
Re: front leaf hangers/body mount
« Reply #1 on: May 15, 2017, 06:59:24 pm »
ok i went out and compared the front leaf hanger between my 1 ton and Dads 3/4 and they are the same, i don't have a half ton so can someone with a half and 1 ton or half and 3/4 go and compare them?
Logged
91 Chevy R3500 Crewcab future project
89 GMC R3500 Cab & Chassis Tool truck project
88 Chevy V30 Crewcab Ex-firetruck
87 Chevy R20 Crewcab future project
84 GMC K1500 winter beater

Offline 1967KaiserM715

  • Junior Member
  • ***
  • Posts: 914
  • 1985 GMC K1500 w/ 6.5 TD
Re: front leaf hangers/body mount
« Reply #2 on: May 15, 2017, 07:59:37 pm »
Quote from: big_al273 on May 15, 2017, 06:59:24 pm
ok i went out and compared the front leaf hanger between my 1 ton and Dads 3/4 and they are the same, i don't have a half ton so can someone with a half and 1 ton or half and 3/4 go and compare them?
I'll check my half ton to the 1 ton tomorrow, I am almost positive they were the same-frame rail thickness is different, and I think around the rear front shackle mount the frame becomes taller for the 3/4 and 1 tons.


Sent from my iPhone using Tapatalk
Logged
Current Vehicles:1985 GMC K10(Daily) 1991 GMC K2500(Daily) 1975 Beetle(not running) 1985 Mercedes 300D(not running) 1952 M35    1967 M715(not running)
 1986 Chevy K30(under repair)

Offline 1967KaiserM715

  • Junior Member
  • ***
  • Posts: 914
  • 1985 GMC K1500 w/ 6.5 TD
Re: front leaf hangers/body mount
« Reply #3 on: May 19, 2017, 04:56:57 am »
Whoops, forgot to reply, I did check them, they were the same


Sent from my iPhone using Tapatalk
Logged
Current Vehicles:1985 GMC K10(Daily) 1991 GMC K2500(Daily) 1975 Beetle(not running) 1985 Mercedes 300D(not running) 1952 M35    1967 M715(not running)
 1986 Chevy K30(under repair)

Offline srozell

  • Registered Users
  • *
  • Posts: 211
  • Newbie
    • My 1980 Chevy
Re: front leaf hangers/body mount
« Reply #4 on: May 20, 2017, 01:08:17 am »
Quote from: 1967KaiserM715 on May 19, 2017, 04:56:57 am
Whoops, forgot to reply, I did check them, they were the same

lol, to be fair you only said you'd check, you never promised anything else!  ;D
Logged
1980 K20 "Camper Special"
1969 K20 Step Side
http://myuglytruck.wordpress.com/

Offline big_al273

  • Registered Users
  • *
  • Posts: 207
  • Newbie
Re: front leaf hangers/body mount
« Reply #5 on: May 20, 2017, 05:43:27 pm »
good info for anyone looking to do a 4wd conversion to know, front leaf hangers/body mounts seem to be the same between K10, K20 and K30s thanks for the help Kaiser
Logged
91 Chevy R3500 Crewcab future project
89 GMC R3500 Cab & Chassis Tool truck project
88 Chevy V30 Crewcab Ex-firetruck
87 Chevy R20 Crewcab future project
84 GMC K1500 winter beater

Offline Dr_Snooz

  • Junior Member
  • ***
  • Posts: 684
  • "I like to take hammers, and just break stuff"
Re: front leaf hangers/body mount
« Reply #6 on: May 20, 2017, 06:30:24 pm »
Yup. That's good info for those of us planning conversions.
Logged
1989 Chevy Suburban V-2500, 5.7L, TH400

1990 Chevy C-3500 Ext. Cab, 7.4L, 3L80

2009 Chevy Silverado 1500 WT 4WD, 4.8L, 4L60

Offline roundhouse

  • Senior Member
  • ****
  • Posts: 1474
  • Newbie
front leaf hangers/body mount
« Reply #7 on: May 24, 2017, 06:56:45 am »
There's several places that sell cross members and hangers for conversions

http://diy4x.com/product.php?productid=17714&cat=250&page=1


Sent from my iPhone using Tapatalk
« Last Edit: May 24, 2017, 07:06:08 am by roundhouse »
Logged

Offline roundhouse

  • Senior Member
  • ****
  • Posts: 1474
  • Newbie
Re: front leaf hangers/body mount
« Reply #8 on: May 24, 2017, 07:05:48 am »






Sent from my iPhone using Tapatalk
Logged
Pages: [1]   Go Up
« previous next »