« previous next »
Pages: [1]   Go Down

Author Topic: 79 C10 fusible link on starter/truck starts slow  (Read 4193 times)

Offline 50dan

  • New Users
  • Posts: 2
  • Newbie
79 C10 fusible link on starter/truck starts slow
« on: June 06, 2017, 04:49:59 pm »
Truck use to start slow on hot starts now doing it all the time.  I think it may be a bad fusible link by the starter it has some bare wire showing.   How can I replace the fusible link on my starter wire?  It looks like 2 wires going into a short plastic housing then 1 wire coming out.  I don't see these available at any parts stores?
« Last Edit: June 06, 2017, 04:51:57 pm by 50dan »
Logged

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: 79 C10 fusible link on starter/truck starts slow
« Reply #1 on: June 07, 2017, 05:25:22 pm »
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: 79 C10 fusible link on starter/truck starts slow
« Reply #2 on: June 07, 2017, 05:26:08 pm »
while youre at it also clean all your connections and dont forget about the ground cables and make sure you have a ground from the battery directly to the engine (normally on the alt bracket)
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes
Pages: [1]   Go Up
« previous next »