Brothers first ride 79 c10

[jpizzle440]

Picked this up for 400$ when I was trying to decide what to do with the crate motor and trans out of my orange truck. Heck of a deal. All the suspension was done, guy had stripped it for racing, luckily not everything was missing. Hood is brand new but they guy didn't paint it. Bed is in decent shape too. We pulled the dash and tested all the circuitry. Chased every sensor for continuity to the dash. Got all new a/c components, had to drop the inner fender to get to the lower bolts/nuts on a/c box. Did all of the interior. Now she's going back together.

Sent from my SAMSUNG-SM-G891A using Tapatalk

[jpizzle440]

Interior.

Sent from my SAMSUNG-SM-G891A using Tapatalk

[jpizzle440]

Used a 5/32 tig wire to fix seat spring. We do all of our own boat upholstery, we have several jet boats. First time we have done anything for a vehicle. Come out nice.

Sent from my SAMSUNG-SM-G891A using Tapatalk

[jpizzle440]

Panels, visor, dash, headliner.

Sent from my SAMSUNG-SM-G891A using Tapatalk

[jpizzle440]

More panels. Went and got a system. Played around on the embroidery machine. He wants pantera on his door panels. Made simple panel to hold rear speakers. 

Sent from my SAMSUNG-SM-G891A using Tapatalk

[jpizzle440]

Cut small peice of aluminium to secure speakers. Get better pictures as he finish wiring. Got one more piece of carpet after he finished with that seat goes in.

Sent from my SAMSUNG-SM-G891A using Tapatalk

[jpizzle440]

Something I forgot. We tried some left over stretch marine vinyl on his dash we had left over from a jet ski seat. Bad idea. Glue would not hold it. Tried 3m 92, and contact cement. Landau cement might have worked but it was too late so we yanked it of and had just enough seat material to recover it.

Sent from my SAMSUNG-SM-G891A using Tapatalk

[Engineer]

Good job on the dash pad. I have a couple that were saved from the trash can in the hopes of “bringing them back” someday. New ones are very expensive.

[jpizzle440]

Good job on the dash pad. I have a couple that were saved from the trash can in the hopes of “bringing them back” someday. New ones are very expensive.

Thanks, I been wanting to do one for a long time. Always wanted to do leather but I think my next one will be vinyl. I'm afraid they won't last long in this texas heat. I'm going to wait until we install this one to see how it fits with the foam we put on it.

Sent from my SAMSUNG-SM-G891A using Tapatalk

[jpizzle440]

He finally finished the wiring. Ready for the seat.

Sent from my SAMSUNG-SM-G891A using Tapatalk

[jpizzle440]

Molding.

Sent from my SAMSUNG-SM-G891A using Tapatalk

[jpizzle440]

He's a little slow messing with the truck. Got the seat in last week. New wiper motor. He's working the door panels again. Making custom wood arm rests at the moment.

Sent from my SAMSUNG-SM-G891A using Tapatalk

[jpizzle440]

Picked up a fan switch and dash bezel at the local pick and pull today. I had bought hime everything new except that switch. Put it in and all works good now. Mounted the dash bezel and custom speaker bezel. Kind of a cheesy way of mounting it but it's tight and looks good. Just got to trim the bolts down. If he don't want a glare from the sun he can take it apart and paint it later. Just need to locate a passenger side vent. Not sure if he wants to get some defrost inserts or leave it like it is.

Sent from my SAMSUNG-SM-G891A using Tapatalk

[jpizzle440]

Couple more angles

Sent from my SAMSUNG-SM-G891A using Tapatalk

[jpizzle440]

Didn't do much over the holidays. Got the panel on the driver side. Found a vent for the far passenger side. The directional vent in the housing was messed up but I had a spare and replaced it. Had some rubber squares on each end when I took it apart. I image this is why they won't stay in position after they wear out. Put them back in and worked fine. Now I know what to do to fix them in the future. Pulled her in the shop and put new hinges and bushings on the passenger door. Forgot to take pics of that. Just put a floor jack under the door and got it off and on myself. Finally tracked down some sport mirrors at a junk yard today for $25. Everywhere I looked online wanted about $30 a pop new. None of my other squares have these. So not sure if I would like them but that's what style come on this truck. Bought some heated mirrors for another truck and I like them. Got to install the radio, replace all the weather stripping on the doors, replace the fuel tank, replace driver side hinges and bushings, line up the doors and fenders, put the front end on and she will be finished. Not going to do any body work until he gets good at driving. No sense in it in case he hits something.

Sent from my SAMSUNG-SM-G891A using Tapatalk