« previous next »
Pages: [1]   Go Down

Author Topic: New member from Iowa  (Read 4655 times)

Offline AOB

  • New Users
  • Posts: 1
  • Newbie
New member from Iowa
« on: January 21, 2018, 11:21:27 pm »
Hello everyone,

I'm Austin from Iowa, I am 24 years old, and own a 1979 K10 short bed, and an 82 c10 long bed 6cyl, and a 2010 Dodge caliber for my daily. I work for a commercial glass company as my day job, and run my own window tinting business on the side, and I have a graphic design degree as well. I enjoy hunting/fishing, working on vehicles, and mostly just being outside. My dad, brother and I have been working on c10's since I was young, anywhere from a '53 to a 70' and most recently the square bodys. My newest project is the 79 k10 which runs great but needs some cab work. Basically the truck is pretty straight but needs a complete makeover of the floor pans, inner, and outer rockers, cab corners, floor supports and cab mounts. I've only done minimal bodywork and have done cab corners, before but never rockers and floor pans. So if you have any pointers in that area they would be greatly appreciated. Hope to meet some of you soon!
Logged

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7595
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: New member from Iowa
« Reply #1 on: January 22, 2018, 06:23:32 am »
Welcome from the St. Louis, MO area!!
Logged
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline Jason S

  • Senior Member
  • ****
  • Posts: 1561
Re: New member from Iowa
« Reply #2 on: January 22, 2018, 10:08:58 am »
Welcome from Kansas
Logged
1973 GMC K2500, Super Custom, Camper Special, 350, TH350, NP203, 4.10's
1974 Chevrolet K10, Custom Deluxe, 350, SM465, NP203, 3.73's

"1) Peace through strength; 2) Trust but verify; 3) Beware of evil in the modern world"

Offline Monkey Uncle

  • Registered Users
  • *
  • Posts: 128
  • Newbie
Re: New member from Iowa
« Reply #3 on: January 22, 2018, 12:44:27 pm »
Welcome from WV!
Logged

Offline Captain Swampy

  • Junior Member
  • ***
  • Posts: 504
  • Wisconsin
Re: New member from Iowa
« Reply #4 on: January 22, 2018, 08:22:38 pm »
Welcome from WI
Logged
1987  350TBI 700R4  4X4  4.56 gears  33" BFG All Terrain


http://forum.73-87chevytrucks.com/smforum/index.php?topic=32209.0

Offline kcwis

  • Newbie
  • Posts: 65
  • Newbie
Re: New member from Iowa
« Reply #5 on: January 22, 2018, 09:02:11 pm »
Another welcome from wisconsin,I recently replaced corners,floor pans on a 76 gmc ,got alot of ideas from the Milkcrate82 link. Take your time,try to keep measurements of openings, fit doors before final welding in of corners,floors,sills,rockers.
Logged

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: New member from Iowa
« Reply #6 on: January 31, 2018, 09:03:42 pm »
welcome from maryland
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Online Rapid Roy

  • Junior Member
  • ***
  • Posts: 644
  • Euless, Texas
Re: New member from Iowa
« Reply #7 on: January 31, 2018, 09:19:46 pm »
Welcome from DFW area, Texas
Logged
1974 Cheyenne 10 LWB STOCK 350 W HEI /TH350/AC/4 BBL Quadrajet
Mopar by Birth
Chevy by Choice
Pages: [1]   Go Up
« previous next »