Author Topic: Dust covers to warn hubs  (Read 887 times)

Offline Gm1970s

  • New Users
  • Posts: 2
  • Newbie
Dust covers to warn hubs
« on: June 15, 2018, 12:26:17 PM »
So I bought warn hubs for my truck and it still has dust covers on the hub
So I got the snap ring off but donít know how to get that other part off of there


Sent from my iPhone using Tapatalk

Offline Gm1970s

  • New Users
  • Posts: 2
  • Newbie
Re: Dust covers to warn hubs
« Reply #1 on: June 15, 2018, 12:27:33 PM »
Hereís the other pic


Sent from my iPhone using Tapatalk

Offline Rapid Roy

  • Junior Member
  • ***
  • Posts: 569
  • Euless, Texas
Re: Dust covers to warn hubs
« Reply #2 on: June 15, 2018, 01:38:56 PM »
Welcome
1974 Cheyenne 10 LWB 350/TH350/AC/4 BBL Quadrajet
Mopar by Birth
Chevy by Choice

Offline Jason S

  • Senior Member
  • ****
  • Posts: 1557
Re: Dust covers to warn hubs
« Reply #3 on: June 15, 2018, 03:04:19 PM »
The external snap ring on the end of the axle shaft needs to be removed.  Check to see if there is an internal snap ring on the drive gear (slug).  If not, pry out the drive gear.

Technical Manuals here: http://forum.73-87chevytrucks.com/smforum/index.php?topic=30115.0

This may also be useful: http://forum.73-87chevytrucks.com/smforum/index.php?topic=30551.msg176074#msg176074

Image below from 1978 Service Manual, Section 3C  Front Suspension (3C-28)
« Last Edit: June 15, 2018, 03:40:20 PM by Jason S »
1973 GMC K2500, Super Custom, Camper Special, 350, TH350, NP203, 4.10's
1974 Chevrolet K10, Custom Deluxe, 350, SM465, NP203, 3.73's

"1) Peace through strength; 2) Trust but verify; 3) Beware of evil in the modern world"