Author Topic: Vbelts  (Read 708 times)

Offline edgaruquintero

  • New Users
  • Posts: 1
  • Newbie
Vbelts
« on: January 28, 2019, 08:37:10 PM »
Thanks for letting me join! Does anyone have info for vbelts swap to serpentine belt on a 350tbi . Its an 87 square body , from my research the 90s 350 vortec has same block? Therefore use same brackets for pulleys etc?


Sent from my iPhone using Tapatalk

Offline Rapid Roy

  • Junior Member
  • ***
  • Posts: 572
  • Euless, Texas
Re: Vbelts
« Reply #1 on: January 28, 2019, 09:31:52 PM »
Welcome
1974 Cheyenne 10 LWB 350/TH350/AC/4 BBL Quadrajet
Mopar by Birth
Chevy by Choice

Offline MrFiveOh

  • Registered Users
  • *
  • Posts: 199
  • The Local Po-Po
Re: Vbelts
« Reply #2 on: January 29, 2019, 11:52:57 AM »
Thanks for letting me join! Does anyone have info for vbelts swap to serpentine belt on a 350tbi . Its an 87 square body , from my research the 90s 350 vortec has same block? Therefore use same brackets for pulleys etc?


Sent from my iPhone using Tapatalk

you can use the serp setup from the 88-98 obs trucks. you can also use the serp setup from the smaller trucks or from a car, those tend to bring the serpentine setup closer together and make it look cleaner
1974 C-10 AKA "Smurf"
350/700R4 Hooker Headers 134-A A/C
4/5 Drop - Ridler 650 rims 20x8.5/20x10
Kenwood single din radio 2 IB-Flat Pioneer Subwoofers Rockford Fosgate Power 1000-bdcp amp

Offline 75gmck25

  • Frequent Member
  • **
  • Posts: 423
  • 1975 GMC K25 Camper Special, 350/TH350/NP203
Re: Vbelts
« Reply #3 on: February 06, 2019, 07:34:27 AM »
I've also seen some combination GM setups in the junkyard, where the main belt is a serpentine, and I think it was the A/C that is running off a separate V-belt.

Bruce