« previous next »
Pages: [1]   Go Down

Author Topic: Transmission crossmember won’t line up.  (Read 2861 times)

Offline mercado1211

  • Registered Users
  • *
  • Posts: 157
  • Newbie
Transmission crossmember won’t line up.
« on: May 05, 2019, 09:49:00 pm »
I have a 79 C10 I am trying to bolt a transmission crossmember on. The front hole on the passengers side top frame flange is not lining up by about an 1/8 inch. Will looosening all the crossmember bolts and finger tightening till all bolts are mounted do the trick? Why else would the crossmember not line up in the mounting holes?


Sent from my iPhone using Tapatalk
Logged
1984 k10 LWB
1984 k5
1979 C10 SWB

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: Transmission crossmember won’t line up.
« Reply #1 on: May 05, 2019, 10:08:55 pm »
the frames flex so it could be how the frame is sitting, but yes loosen all the bolts and finger tight them.
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline mercado1211

  • Registered Users
  • *
  • Posts: 157
  • Newbie
Re: Transmission crossmember won’t line up.
« Reply #2 on: May 05, 2019, 11:08:13 pm »
Ok, hopefully it isn’t an issue with a tweaked frame. It doesn’t appear that way since it is only off by an 1/8 inch. I’m also having issues with lining the bed up as well, it seems to protrude  to the right a little. When I tried shifting the bed straight it would not give. The bed is a little diamond tweaked by about 5/16. That might explain it.

I really appreciate your response. Thanks.


Sent from my iPhone using Tapatalk
Logged
1984 k10 LWB
1984 k5
1979 C10 SWB
Pages: [1]   Go Up
« previous next »