« previous next »
Pages: [1]   Go Down

Author Topic: Cam  (Read 3610 times)

Offline mikewb

  • Registered Users
  • *
  • Posts: 167
Cam
« on: May 07, 2007, 05:23:46 pm »
what all do i have to change in order to fit a 278H cam into my 350 if anything..
« Last Edit: May 07, 2007, 06:07:07 pm by Captkaos »
Logged

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18461
    • http://www.73-87chevytrucks.com
Re: Cam
« Reply #1 on: May 07, 2007, 06:08:53 pm »
Who's 278 Cam?  If the heads are stock and the lift is over .480" you will need to change the valve springs and you will need new lifters to go with the cam.
Of course if you are changing it out, you are going to need new gaskets etc.
Logged

Offline mikewb

  • Registered Users
  • *
  • Posts: 167
Re: Cam
« Reply #2 on: May 07, 2007, 06:39:15 pm »
Cranes.... and i think it is 480" lift
Logged

Offline mikewb

  • Registered Users
  • *
  • Posts: 167
Re: Cam
« Reply #3 on: May 07, 2007, 06:42:25 pm »
Lift: .480''/.500''
Logged

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18461
    • http://www.73-87chevytrucks.com
Re: Cam
« Reply #4 on: May 08, 2007, 05:47:30 pm »
personally, I would get new springs.  How old are the existing ones?  You could also get them checked.
Logged
Pages: [1]   Go Up
« previous next »