« previous next »
Pages: [1]   Go Down

Author Topic: 62 Chevy Truck part  (Read 4379 times)

Offline chevyguy5894

  • Newbie
  • Posts: 52
62 Chevy Truck part
« on: September 04, 2007, 09:43:46 pm »
Does anyone know where to get a patch panel for the roof for my 62 its the front part that sticks out on above the windshield.
Logged

Offline bigblock73

  • Junior Member
  • ***
  • Posts: 504
  • Yeller
Re: 62 Chevy Truck part
« Reply #1 on: September 04, 2007, 10:01:23 pm »
My first choice would be another section of room from a donor '62.  I do not think you can buy this piece new anywhere.
Logged
Jeff

'73 swb 2wd

73-87.com

Offline Novadiecast

  • Registered Users
  • *
  • Posts: 145
Re: 62 Chevy Truck part
« Reply #2 on: September 04, 2007, 10:09:30 pm »
I am no body man but that looks fixable to me. Seams a lot easier.
Logged
1985 Crew Cab dually project soon to be SRW Short Bed

Offline chevyguy5894

  • Newbie
  • Posts: 52
Re: 62 Chevy Truck part
« Reply #3 on: September 04, 2007, 10:13:48 pm »
I have another one but its in the same condition because this project has been going for 16 or 17 years. My dad gave it to me a year ago and im just now started to do some work on it. Heres a look with the roof off.



Heres a pic of the top of that part imlooking for


Alot of work ahead but its all rust issues not much body work.
Logged

Offline Novadiecast

  • Registered Users
  • *
  • Posts: 145
Re: 62 Chevy Truck part
« Reply #4 on: September 04, 2007, 10:30:55 pm »
OHHHH!!!!!!! No I see said the blind man!!!!!!!!!!!
Logged
1985 Crew Cab dually project soon to be SRW Short Bed

Offline Blazin

  • Blazin new trails!
  • Senior Member
  • ****
  • Posts: 6130
Re: 62 Chevy Truck part
« Reply #5 on: September 05, 2007, 05:13:31 am »
Making a patch would be allot easier than looking for a patch panel in my opinion.
 Only other thing I could suggest is using a different area of the donor roof, same bend.
Logged
Some people are like Slinkies. Not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs

Offline chevyguy5894

  • Newbie
  • Posts: 52
Re: 62 Chevy Truck part
« Reply #6 on: September 05, 2007, 06:24:45 pm »
I looked and looked and didnt find one so ill just weld them and grind them down. I started on the inner part filling in holes and grinding them down. After I get done im going to prep and por15 the two roof sections and put them back together and start on the rocker panels.
Logged
Pages: [1]   Go Up
« previous next »