« previous next »
Pages: [1]   Go Down

Author Topic: 9/1 Leaf Spring - Ride Quality Question  (Read 3868 times)

Offline SuperT

  • Newbie
  • Posts: 4
9/1 Leaf Spring - Ride Quality Question
« on: February 22, 2011, 12:33:03 pm »
Hi,

I have a 1984 Chevy K30 DRW that I hope to convert to a utility body.  It's in need of new rear springs and I was curious if anyone has any experience with the ride quality differences  between 3950 lbs or 4650 lbs 9/1 springs.  

I appreciate any opinions.

Thanks.
« Last Edit: February 22, 2011, 12:46:36 pm by SuperT »
Logged
Push to test, release to detonate.

Offline slammed79

  • Senior Member
  • ****
  • Posts: 1367
  • Thou shalt not drive stock
Re: 9/1 Leaf Spring - Ride Quality Question
« Reply #1 on: February 22, 2011, 01:28:57 pm »
Welcome from Arizona. These trucks never rode too smooth from the factory, especially the 1 Tons. I'm sure someone will pipe up with preferences.
Logged
74 C10 Long bed 350/SM465 Lowered on 20's

Praise the lowered

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18461
    • http://www.73-87chevytrucks.com
Re: 9/1 Leaf Spring - Ride Quality Question
« Reply #2 on: February 22, 2011, 06:47:26 pm »
If you are adding a utility body I would size it accordingly.  with extra weight you won't notice it.
Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19181
Re: 9/1 Leaf Spring - Ride Quality Question
« Reply #3 on: February 22, 2011, 06:57:09 pm »
What axles are under it?
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline SuperT

  • Newbie
  • Posts: 4
Re: 9/1 Leaf Spring - Ride Quality Question
« Reply #4 on: February 22, 2011, 10:00:40 pm »
Thank you for the replies. The axles are Dana 60 front and 14 Bolt rear. I'm not sure if it's possible, but with the heavy springs, if I hit a bump in the road I'd rather it didn't sound like a small explosion.  I think the empty body is 1200-1300 pounds or so.
Logged
Push to test, release to detonate.

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: 9/1 Leaf Spring - Ride Quality Question
« Reply #5 on: February 23, 2011, 07:34:45 am »
     Like capt. said, you should estimate the weight of the utility body with what you are going to carry and talk to a local spring shop, they will calulate what springs to run and you wont even feel it with enough weight in back.
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline Donut

  • Frequent Member
  • **
  • Posts: 402
Re: 9/1 Leaf Spring - Ride Quality Question
« Reply #6 on: February 23, 2011, 07:36:48 am »
How much of a load are the boxes hauling?  I know they'll hold quite a bit and the weight adds up fast.

Maybe an overload spring setup?
Logged
'73 Chevy K-20 ***SOLD***
350/tbh350/np205
My plow was half price if i took the truck with it.

'86 C-30 dually, 454/tbh400
Pages: [1]   Go Up
« previous next »