I have an 87 Chevy 305 TBI 1/2 ton 4wd. I had a leaking head gasket. Pulled the heads ,had them inspected and surfaced. During the repair I replaced rocker arms ,pushrods, distributer, wires, plugs. After all this my truck would just not start at times . No pattern to it at all. I could turn the key , it would crank but not start. Pour fuel into the TBI and it would start. Fuel is coming from the pump. I pulled the fuel line off the TBI and had plenty. Replaced the fuel pressure reg. ECS, TPS,Ignit Mod. Map sensor, EGR, O2 sens. fuel pump ( that sucked) . I am not getting any fuel out of the injectors when i crank the engine. Fuses are good. No one around rents/loans the fuel pressure guage and its $45 to buy. Nobody has a noid light either , would have to order. Can I check the injectors with just a test light? I am not very electrical /automotive savvy but I am learning through expereince. Before all this I was getting 17 mpg now when she runs I am at 12mpg. Any help would be appreciated.