« previous next »
Pages: [1]   Go Down

Author Topic: Lowering a '82 K20  (Read 8042 times)

Offline Patchburgh

  • New Users
  • Posts: 1
  • Newbie
Lowering a '82 K20
« on: October 21, 2012, 08:25:45 pm »
 I was told I couldn't lower my K20 because it was 4 wheel drive. Any advice for kits or anything is helpful.
Logged

Offline slammed79

  • Senior Member
  • ****
  • Posts: 1367
  • Thou shalt not drive stock
Re: Lowering a '82 K20
« Reply #1 on: October 21, 2012, 10:52:29 pm »
You can't really drop the straight axle 4x4's. Later model ifs 4x4's can be lowered a little bit.

Advice would be to get a C20. Sorry man.
Logged
74 C10 Long bed 350/SM465 Lowered on 20's

Praise the lowered

Offline Blazin

  • Blazin new trails!
  • Senior Member
  • ****
  • Posts: 6130
Re: Lowering a '82 K20
« Reply #2 on: October 22, 2012, 07:38:01 am »
Only kits to modify a 4x4 suspension is to lift it. If you want a lowered truck you need a 2 wheel drive.
Logged
Some people are like Slinkies. Not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18461
    • http://www.73-87chevytrucks.com
Re: Lowering a '82 K20
« Reply #3 on: October 22, 2012, 08:13:16 pm »
Not because it is 4 Wheel Drive as much as it is a solid axle leaf sprung 4 wheel drive...
Logged

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7595
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: Lowering a '82 K20
« Reply #4 on: October 22, 2012, 08:22:30 pm »
Quote from: Patchburgh on October 21, 2012, 08:25:45 pm
I was told I couldn't lower my K20 because it was 4 wheel drive. Any advice for kits or anything is helpful.

In stock height no.  Post a picture, if a previous modification was done going back to stock may lower it. 
Logged
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Online Da67goatman

  • Site Supporters
  • Junior Member
  • ******
  • Posts: 758
  • Burban
Re: Lowering a '82 K20
« Reply #5 on: October 22, 2012, 10:43:02 pm »
If you are willing to ditch the leaf springs you can lower it on coils or airbags, but it requires a complete suspension overhaul.
Logged
<Pitcrew>
1989 R2500 Suburban mild 350 TBI 700r4 10.5" 14bolt 4.10 w/ 33s
1992 fullsize Blazer 4x4  35s no lift, 4.10s, Hella driving lights, TJ Flares, Huge bumpers, Snorkel, custom interior

Offline Elpresidente

  • Registered Users
  • *
  • Posts: 212
Re: Lowering a '82 K20
« Reply #6 on: October 23, 2012, 09:46:09 am »
Not worth the effort if you want to drop it below stock height. I'd go with what everyone else is suggesting and get a 2WD.
4x4's were meant to be 4x4's, lol.
Logged
'82 Chev Scottsdale
Proud to be Canadian \m/

Online VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19180
Re: Lowering a '82 K20
« Reply #7 on: October 23, 2012, 09:50:02 am »
Why do you want to lower it. You can do it but it doesn't make a lot of sense for the $$ you're going to spend.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18461
    • http://www.73-87chevytrucks.com
Re: Lowering a '82 K20
« Reply #8 on: October 23, 2012, 11:21:56 am »
Even if you were to get it lower unless you ditch the solid axles it will never sit lower than a stock 2WD truck.
Logged
Pages: [1]   Go Up
« previous next »