« previous next »
Pages: [1]   Go Down

Author Topic: 1995 impala ss rear end on 85 stepside ?  (Read 4752 times)

Offline 85c10stepcustom

  • Newbie
  • Posts: 20
  • Showstopper
1995 impala ss rear end on 85 stepside ?
« on: October 10, 2015, 12:14:57 pm »
Does anyone know if you a rear end out of a 1995 Impala with posi would swap out with the stock rear end out of my 1985 stepside ?
Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19211
Re: 1995 impala ss rear end on 85 stepside ?
« Reply #1 on: October 10, 2015, 06:56:32 pm »
It's a smaller unit and designed to work with coil springs. Why do you want to swap the rear end?
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline 85c10stepcustom

  • Newbie
  • Posts: 20
  • Showstopper
Re: 1995 impala ss rear end on 85 stepside ?
« Reply #2 on: October 11, 2015, 02:05:13 pm »
Disc brakes and posi !
Logged

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18471
    • http://www.73-87chevytrucks.com
Re: 1995 impala ss rear end on 85 stepside ?
« Reply #3 on: October 11, 2015, 02:14:51 pm »
It is and 8.5 like the 81-87 1/2T trucks.  I think (if memory serves me right) that they are slightly narrower.
Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19211
Re: 1995 impala ss rear end on 85 stepside ?
« Reply #4 on: October 11, 2015, 06:19:16 pm »
I'm pretty sure they were all highway geared too.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18471
    • http://www.73-87chevytrucks.com
Re: 1995 impala ss rear end on 85 stepside ?
« Reply #5 on: October 13, 2015, 09:40:30 pm »
Yes, 2.56 for non Impala SS and 3.08 for the SS.
30 spline axles and the SS had a limted slip factory.
Logged

Offline Mtrhd329

  • Registered Users
  • *
  • Posts: 133
Re: 1995 impala ss rear end on 85 stepside ?
« Reply #6 on: November 13, 2015, 08:35:39 pm »
I swapped one into my 79. Cut off the perches and welded on new ones to flip the axle.   Swapped in 3.73s a buddy had and a true trac and it runs great.  Had to run. 2" spacer but if you want larger tires you could just get larger rims
Logged
Pages: [1]   Go Up
« previous next »