inner fender removal/heater core

[NCali]

2 wd 1/2 ton w air


I am replacing the heater core and I read the post in the tech section.
I removed the bolts on the inner fender to move it out of the way and it dont move
it looks like I am going to have to un bolt the fender because the inner fits inside of the fender
Also I cant even see the bolts I need to remove. Are they inside the ac evap housing?

[NCali]

Got it: so in the tech section :heater core removal: under the with ac instructions:
you might ad  removing the inner fender well because you cant see the bolts going through the fire wall unless you do

[VileZambonie]

Which thread were you looking at? Yes you need to remove the inner fender in order to access the bolts on the firewall.

[NCali]

tech section :heater core removal: under the with ac instructions:
once the inner fender is out there is plenty of room to do all kinds of stuff

[redhot1.4]

Negative on removing the inner fender well. A swivel some tape to keep from rolling to much and 4 extensions you can get that nut off with out dropping the fender well or drilling holes

Sent from my SAMSUNG-SM-G870A using Tapatalk