« previous next »
Pages: [1]   Go Down

Author Topic: Th400 vacuum line  (Read 2343 times)

Offline Rzaszutak

  • Newbie
  • Posts: 4
  • Newbie
Th400 vacuum line
« on: January 13, 2023, 02:04:17 pm »
Hello guys, so I’m doing a resto mod on a 76 c10 and I was wondering where the transmission vacuum line connects to on the engine. I’m not use to working on gas engines

TIA


Sent from my iPhone using Tapatalk
Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19151
Re: Th400 vacuum line
« Reply #1 on: January 13, 2023, 06:34:46 pm »
Manifold vacuum, on the tee at the back of the intake.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline Rzaszutak

  • Newbie
  • Posts: 4
  • Newbie
Re: Th400 vacuum line
« Reply #2 on: January 13, 2023, 06:36:22 pm »
Ok, I don’t have a tee because the engine was rebuilt at a shop. What does the other part of the tee go to?


Sent from my iPhone using Tapatalk
Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19151
Re: Th400 vacuum line
« Reply #3 on: January 13, 2023, 06:51:28 pm »
It's just a manifold vacuum tap, all depends on what you are running for vacuum accessories. Wherever you tap in, you need full manifold vacuum not ported.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline Rzaszutak

  • Newbie
  • Posts: 4
  • Newbie
Re: Th400 vacuum line
« Reply #4 on: January 13, 2023, 06:55:39 pm »
Ok thanks, one more question lol. I have never worked with a carb before so what ports do I hook the distributor vac line to and the vapor line to? And also the valve cover breather line?


Sent from my iPhone using Tapatalk
Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19151
Re: Th400 vacuum line
« Reply #5 on: January 13, 2023, 07:06:13 pm »
It depends, most people run full vacuum to the distributor advance with aftermarket performance parts unless they are trying to be emissions compliant. Canister purge is usually timed and ported but not enough info on your setup to be specific.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline Rzaszutak

  • Newbie
  • Posts: 4
  • Newbie
Re: Th400 vacuum line
« Reply #6 on: January 13, 2023, 07:07:54 pm »
I have a 454 with a brawler carb, and GM performance distributor


Sent from my iPhone using Tapatalk
Logged
Pages: [1]   Go Up
« previous next »