« previous next »
Pages: [1]   Go Down

Author Topic: Idler Arm and Pitman Arm Torque Specs  (Read 3081 times)

Offline LILT77

  • Newbie
  • Posts: 28
  • Newbie
Idler Arm and Pitman Arm Torque Specs
« on: June 20, 2023, 09:16:10 pm »
Looked through the FSM, maybe Im blind. Replacing the idler arm and pitman arm. Does anyone know the torque values associated with these parts? Idler arm to frame mount/center-link, pitman arm to gearbox/center-link?
Logged
77 C10/Big 10 Cheyenne "Old Blue"
81 C2500 Sierra Grande "Gramps"

Offline JohnnyPopper

  • Senior Member
  • ****
  • Posts: 2709
  • Old Goof
Re: Idler Arm and Pitman Arm Torque Specs
« Reply #1 on: June 21, 2023, 11:45:27 am »
Mostly depends on the size of the bolt/nut/thread count. I'm sure there is a torque guide on line.

The ball joints of those components go as tight as you can to get the cotter pin to line up.
Logged
1957 Apache 3100 235 Inline 6, 3 on the tree
1973 C-20, 3+3 454 4BBL TH400  Water Injection
1978 K-10, 350 4BBL TH350 NP203 M.M. Part time Kit/Hubs
1980 C-10 under construction

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19151
Re: Idler Arm and Pitman Arm Torque Specs
« Reply #2 on: June 22, 2023, 05:57:52 am »
Pitman arm nut to gear box is 185 ft-lbs, pitman arm to relay rod is 66 ft-lb, idler arm to frame is 30 ft-lb, idler to relay rod is 66 ft-lb.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10
Pages: [1]   Go Up
« previous next »