« previous next »
Pages: [1]   Go Down

Author Topic: Driveshaft issue  (Read 2957 times)

Offline dumbucket1

  • Too Many Trucks
  • Junior Member
  • ***
  • Posts: 597
  • Coal Hauler
Driveshaft issue
« on: June 19, 2007, 07:02:51 pm »
I was putting my driveshaft back on the truck today and it seems like it is too long now. I didn't move the crossmember and the transmission is exactly where it was before. Is this a 2 piece driveshaft that pulls apart? I tried pushing it back in and it won't budge. 76 chevy silverado 3/4 ton long bed th400.
Logged
Chevy and GMC trucks ranging from 1973 to 2007

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19180
Re: Driveshaft issue
« Reply #1 on: June 19, 2007, 08:53:26 pm »
Is the slip yoke binding? Lube it up and push it back together
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline dumbucket1

  • Too Many Trucks
  • Junior Member
  • ***
  • Posts: 597
  • Coal Hauler
Re: Driveshaft issue
« Reply #2 on: June 19, 2007, 10:21:20 pm »
You were right Vile, the slip yoke was binding. A little pb blaster sprayed on it did the trick.
Logged
Chevy and GMC trucks ranging from 1973 to 2007
Pages: [1]   Go Up
« previous next »