« previous next »
Pages: [1]   Go Down

Author Topic: Methanol/Water injection?  (Read 5204 times)

Offline Rib Tickler

  • Newbie
  • Posts: 21
Methanol/Water injection?
« on: January 17, 2009, 09:50:36 am »
 :oAny of you guys tryed these things? do they do what they are supposed to? I seen them at Jegs, can`t remember the link, I`ll see if I can find it.
Logged

Offline Chevalade

  • Frequent Member
  • **
  • Posts: 329
Re: Methanol/Water injection?
« Reply #1 on: January 17, 2009, 10:38:14 am »
They do work really well. But no for use on lower compression motors unless they are boosted.
Logged

Offline joesgarage71

  • Wrench
  • Senior Member
  • ****
  • Posts: 1156
Re: Methanol/Water injection?
« Reply #2 on: January 18, 2009, 09:18:13 pm »
 I'd like to get a kit for my 04 after things pick up at work. Don't need to be boosted will work on reg gas truck.
http://www.aquatune.com/index.asp

http://www.coolingmist.com/pagedisplay.aspx?feature_key=gasvehicles
« Last Edit: January 18, 2009, 09:30:16 pm by joesgarage71 »
Logged
78' K-20 355/SM465/twin stick 205 6" on 36's
14 bolt FF/big bearing Dana 44 4.56 gears
92' GMC C-1500 454/4L80E/14 bolt

Offline 85MudMonster

  • Frequent Member
  • **
  • Posts: 392
Re: Methanol/Water injection?
« Reply #3 on: January 18, 2009, 10:24:13 pm »
swo it injects water into your engine, or methanol, or both?
Logged
Dan

85 Chevy K10 - 408 BBC from a 71 Chevelle SS, TH350, NP208, 33" Mastercraft Courser M/T

Offline Rib Tickler

  • Newbie
  • Posts: 21
Re: Methanol/Water injection?
« Reply #4 on: January 18, 2009, 11:05:40 pm »
yes...I`ve seen that aquatune one...and thats the one I think I`m gonna try. Hopefully at the end of this month I`ll order one!
Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19210
Re: Methanol/Water injection?
« Reply #5 on: January 18, 2009, 11:07:45 pm »
Water injection was originally used to help quench high compression engines.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline joesgarage71

  • Wrench
  • Senior Member
  • ****
  • Posts: 1156
Re: Methanol/Water injection?
« Reply #6 on: January 19, 2009, 09:02:56 am »
Quote from: VileZambonie on January 18, 2009, 11:07:45 pm
Water injection was originally used to help quench high compression engines.
  ..., gave our fly boys a extra boost of power during take off in the 1940's
Logged
78' K-20 355/SM465/twin stick 205 6" on 36's
14 bolt FF/big bearing Dana 44 4.56 gears
92' GMC C-1500 454/4L80E/14 bolt

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18471
    • http://www.73-87chevytrucks.com
Re: Methanol/Water injection?
« Reply #7 on: January 19, 2009, 12:21:56 pm »
My brother uses it on his turbo truck.  He/(we) sell snowperformance pieces.
Logged

Offline mattevandavis

  • Newbie
  • Posts: 99
Re: Methanol/Water injection?
« Reply #8 on: January 25, 2009, 08:34:34 pm »
Great on boosted apps.  it is marginal on non boosted apps.  the meth burns cooler than gas .  turbos burn hot with high boost and high advance so it helps advance timing with out det.

Logged
Pages: [1]   Go Up
« previous next »