« previous next »
Pages: [1]   Go Down

Author Topic: am i missing something?  (Read 5800 times)

Offline baddogg79

  • Registered Users
  • *
  • Posts: 120
am i missing something?
« on: July 04, 2009, 02:00:44 pm »
Im picking away at the stuff i can to on the 73. Right now im getting the heating set up. Here is a pic of my problem


Am I missing anything between the defrost vents and the heater box? Or is it a thick seal?


Also I have a missing fuse, it comes off the junction box on the firewall and goes to the blower motor plug. What amp fuse is it? On the wiring sheets I printed from here it says 4 amps. Is that right or im looking in the wrong place?



edit: bad spelling :P
Logged

Offline 77chevystepside

  • Registered Users
  • *
  • Posts: 142
  • 77 Chevy Stepside 4X4
    • 77 Chevy Stepside Restoration
Re: am i missing something?
« Reply #1 on: July 05, 2009, 07:31:13 am »
My 77 has the same defroster gap and I was wondering too. I worked hard to reposition it and got the gap almost eliminated. I had to laugh because when I started working under the dash, there was duct tape around it. When I pulled the tape off it looks just like your picture. I am not sure that duct tape is all that bad an idea. I didn't tape mine because the gap is about 1/8" now and I can live with a little leakage because I won't be driving mine in the winter.
Sorry, not sure about the wiring. I have no wire coming from the firewall block to my heater. Wires going to my heater all come from inside the cab. Maybe someone else can help you.
Logged

Offline baddogg79

  • Registered Users
  • *
  • Posts: 120
Re: am i missing something?
« Reply #2 on: July 05, 2009, 08:04:23 am »
Thanks for your reply. At lease now I know Im not the only one ;D I look into it more later. The previous owner really butchered this truck up. Im picking away at the small things this I can buy the bigger stuff.
Logged

Offline HAULIN IT

  • Senior Member
  • ****
  • Posts: 1542
Re: am i missing something?
« Reply #3 on: July 05, 2009, 10:35:32 am »
Dog, The gap is pretty much "normal" er, common. As mentioned, it can usually be closed up a little better than that, but not by much. On one of mine I put 3/4" stick on foam seal on top of the box when it was going together.
 The White fuse holder is "non factory equipment", not sure what someone was doing with that. Also, in the last picture...Where does that wiring go to? I'm guessing it is unplugged in the photo? Lorne
Logged

Offline baddogg79

  • Registered Users
  • *
  • Posts: 120
Re: am i missing something?
« Reply #4 on: July 05, 2009, 11:18:44 am »
Quote from: HAULIN IT on July 05, 2009, 10:35:32 am
The White fuse holder is "non factory equipment", not sure what someone was doing with that. Also, in the last picture...Where does that wiring go to? I'm guessing it is unplugged in the photo? Lorne

The fuse holder goes to the blower relay. The truck did have factory AC if that makes a difference. The in the last picture, i pulled the harness through the firewall, thats all the wiring for the heater/ac.
Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19167
Re: am i missing something?
« Reply #5 on: July 05, 2009, 11:29:02 am »
The fuse holder is factory.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19167
Re: am i missing something?
« Reply #6 on: July 05, 2009, 11:52:04 am »
Here I scanned a pic.. 30 amp inline fuse



Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline baddogg79

  • Registered Users
  • *
  • Posts: 120
Re: am i missing something?
« Reply #7 on: July 05, 2009, 12:23:08 pm »
Thank you so much Vile ;D I appreciate it.
Logged
Pages: [1]   Go Up
« previous next »