« previous next »
Pages: [1]   Go Down

Author Topic: Rear Flip kit quest.  (Read 4993 times)

Offline 79c10454

  • Newbie
  • Posts: 31
Rear Flip kit quest.
« on: August 01, 2008, 10:31:01 am »
If i do 5inch drop flip kit do i have to c-notch the frame i was just wondering
Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19177
Re: Rear Flip kit quest.
« Reply #1 on: August 01, 2008, 10:38:11 am »
No
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline 79c10454

  • Newbie
  • Posts: 31
Re: Rear Flip kit quest.
« Reply #2 on: August 01, 2008, 10:41:18 am »
Hey thnxs bro which brand qould reccomend since you have more time doing this then me
Logged

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18460
    • http://www.73-87chevytrucks.com
Re: Rear Flip kit quest.
« Reply #3 on: August 01, 2008, 10:47:38 am »
Any flip kit manufacturer will work.  Last set I used was Western Chassis.  Does your truck had the HD springs?
Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19177
Re: Rear Flip kit quest.
« Reply #4 on: August 01, 2008, 01:39:16 pm »
I got mine from Summit
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline 79c10454

  • Newbie
  • Posts: 31
Re: Rear Flip kit quest.
« Reply #5 on: August 01, 2008, 02:12:02 pm »
yes it does have the heavy duty springs what do i change
Logged

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18460
    • http://www.73-87chevytrucks.com
Re: Rear Flip kit quest.
« Reply #6 on: August 02, 2008, 10:44:32 am »
If it had standard springs, it will tend to bottom out on large bumps, so I would recommend one on those.  With HD springs that isn't as likely.
Logged

Offline three8six

  • Frequent Member
  • **
  • Posts: 486
Re: Rear Flip kit quest.
« Reply #7 on: August 03, 2008, 09:46:31 pm »
On my truck when i flipped the rearend, I cut out the bumpstop brackets and put in some energy suspension bumpstops that were shorter and i gained back alot of the rearend travel I also had to put pinion shims in my leaf springs(2 degrees).
Logged
Pages: [1]   Go Up
« previous next »