« previous next »
Pages: [1]   Go Down

Author Topic: TPS adjustment  (Read 2728 times)

Offline plumberkrak

  • New Users
  • Posts: 1
TPS adjustment
« on: January 19, 2009, 10:23:34 pm »
hello. i have an 87 3/4 ton 4x4 truck with a 350. my check engine light is coming on and off lately and so i checked the code. it was a code 22. Throttle posistion sensor is set to low. my question is if anyone can tell me what the sensor should be set at (voltage wise) and how to adjust it? thanks for any response.
Logged

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: TPS adjustment
« Reply #1 on: January 20, 2009, 01:20:10 am »
dint know you could adjust it but autozone should have books behind the counter for the zoners to use to test tps and other electrical things they should also have the tools to test it
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19192
Re: TPS adjustment
« Reply #2 on: January 20, 2009, 06:33:35 am »
loosen the screws and rotate the tps until you read .55v with the throttle closed. Then tighten the screws. If you don't have a scan tool just back probe the sensor with your meter.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠¯¯¯¯¯'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18468
    • http://www.73-87chevytrucks.com
Re: TPS adjustment
« Reply #3 on: January 20, 2009, 12:07:01 pm »
Vile posted before i could, but I back probed mine, and I also get this info via WinALDL on my laptop.
Logged
Pages: [1]   Go Up
« previous next »