« previous next »
Pages: [1]   Go Down

Author Topic: question about beds  (Read 7121 times)

Offline jay6776

  • Newbie
  • Posts: 86
    • Cars I Have Done
question about beds
« on: January 25, 2009, 01:34:43 pm »
hey all I'm getting my truck ready to paint. Getting tired of brown . So i want to change the color. I'm thinking of a dirty white. But anyways back to me question I don't want to take the bed off the frame but I don't want to be able to see brown when i look down at the back of the cab. Has any of you changed the color with out pulling the bed off.Were you able to see the old color down there. and can i unbolt the front of the bed and take that off when the bed is still on there?
thanks jay
Logged

Offline joesgarage71

  • Wrench
  • Senior Member
  • ****
  • Posts: 1156
Re: question about beds
« Reply #1 on: January 25, 2009, 02:08:53 pm »
I never thought of doing that, I suppose you could.
Logged
78' K-20 355/SM465/twin stick 205 6" on 36's
14 bolt FF/big bearing Dana 44 4.56 gears
92' GMC C-1500 454/4L80E/14 bolt

Offline choptop

  • Senior Member
  • ****
  • Posts: 2476
  • Extended cab fanatic
    • conversiontrucks
Re: question about beds
« Reply #2 on: January 25, 2009, 04:48:42 pm »
It would probably take less time to unbolt the bed from the frame and slide it back than it would to unbolt the front peice, and remove it. It sounds like a good thought tho. I may look into that when I paint my dually. Interested to see what we come up with here.
Logged
76 C10 Choptop,76 C10 Swb
85 C10, 85 K10, 85 K20,86 C10,86 K10 (all extended cabs)
86 C30 extended crewcab

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19182
Re: question about beds
« Reply #3 on: January 25, 2009, 05:07:39 pm »
No you won't be able to do that. It would take forever to try and wrench all the bolts out, break apart the seam sealer and since the bedsides bolt on over it you'd have to pretty much destroy it. Why not just unbolt the bed and slide it back?
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline hotrod24

  • Senior Member
  • ****
  • Posts: 1696
Re: question about beds
« Reply #4 on: January 25, 2009, 06:41:32 pm »
yea them front panel bolts are hard to get to even when the bed is in peaces lol so just unbolt it or just cut the bolts off because you might run into some trouble but just slide it back and you will be good  ;)

 








« Last Edit: January 25, 2009, 06:51:16 pm by hotrod24 »
Logged
1980 1/2 ton shortbed project...
1978 pontiac grand prix...

Offline 79scottsdale

  • Newbie
  • Posts: 24
Re: question about beds
« Reply #5 on: January 25, 2009, 06:56:50 pm »
Ditto on just unbolting the bed and sliding it backward. It really does not take that long.
Logged
Working on the truck with my son.........Life doesn't get any better than that!

1979 Scottsdale C10 4X4 (We are the second owner.)

Offline jay6776

  • Newbie
  • Posts: 86
    • Cars I Have Done
Re: question about beds
« Reply #6 on: January 25, 2009, 08:16:32 pm »
Yeah I know that sliding it back would be the best way. But alot of the bolts are rusted up. So i was just thinking of another way. I saw them bolts in the front  broke a bunch of them lose. The only prob I see is pushing the bed sides apart far enuff   to get the front panel out.  Well if i do it I will post some pics.
jay
Logged

Offline 78 Chevyrado

  • Z62 ON-ROAD
  • Site Supporters
  • Senior Member
  • ******
  • Posts: 2748
    • My Photobucket Site
Re: question about beds
« Reply #7 on: January 25, 2009, 09:55:00 pm »
You can't get any helpers?  I don't see taking the front panel off at all while the bed is bolted down.  And the only way to get the front panel out the top is to remove at least one bed side.  We took my long bed off in a few minutes with just 3 people, but we used 4 people to put it back once it was painted up ;D.  You can also take the back wheels off to be able to slide the bed back a bit farther. 
Logged
Kenny

1978 C-20, 350/400, 3.73, Graystone Metallic, Raceline Renegade 8 Wheels - 18x8.5, 275/70R18 BFG KO's

Offline hotrod24

  • Senior Member
  • ****
  • Posts: 1696
Re: question about beds
« Reply #8 on: January 25, 2009, 09:55:54 pm »
Take this from someone that did this.  Even with all the bolts out, you are going to have a hard time getting the bed sides apart to squeeze out that panel.  Even when I had all the bolts out of the bed sides I had to kick the heck out of them to move them and I had the inner tubs out so with the whole bed intact you are going to mess it up.

good luck
Logged
1980 1/2 ton shortbed project...
1978 pontiac grand prix...

Offline jay6776

  • Newbie
  • Posts: 86
    • Cars I Have Done
Re: question about beds
« Reply #9 on: January 25, 2009, 10:03:10 pm »
Thanks all guess i will not waste my time taking all them bolts out. Was just a thought.
thanks againg
jay
Logged

Offline hotrod24

  • Senior Member
  • ****
  • Posts: 1696
Re: question about beds
« Reply #10 on: January 25, 2009, 10:05:28 pm »
ok man that is good to hear now just take a sawzaw and cut the bolts and repaint it and show us some pics  ;)
Logged
1980 1/2 ton shortbed project...
1978 pontiac grand prix...

Offline Blazin

  • Blazin new trails!
  • Senior Member
  • ****
  • Posts: 6130
Re: question about beds
« Reply #11 on: January 25, 2009, 11:28:12 pm »
I have sprayed a few rigs with a color change. If your good with a spray gun, turn it down from fan to stream shot and shoot it in there about half trigger you wont be able to tell with out really looking. In other words a body man or truck nut could probably tell, but for a daily driver it will look fine.
Logged
Some people are like Slinkies. Not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19182
Re: question about beds
« Reply #12 on: January 26, 2009, 07:32:06 am »
Start soaking the bed bolts down now with a good penetrating oil.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline jay6776

  • Newbie
  • Posts: 86
    • Cars I Have Done
Re: question about beds
« Reply #13 on: January 26, 2009, 06:38:26 pm »
Quote from: Blazin on January 25, 2009, 11:28:12 pm
I have sprayed a few rigs with a color change. If your good with a spray gun, turn it down from fan to stream shot and shoot it in there about half trigger you wont be able to tell with out really looking. In other words a body man or truck nut could probably tell, but for a daily driver it will look fine.

Yeah thats what I'm going to do. Might not get all the way in but i think it will be good enuff
thanks jay
Logged
Pages: [1]   Go Up
« previous next »