« previous next »
Pages: 1 [2] 3   Go Down

Author Topic: 10 ft or 12 ft?  (Read 19188 times)

Offline Novadiecast

  • Registered Users
  • *
  • Posts: 145
Re: 10 ft or 12 ft?
« Reply #15 on: February 10, 2009, 06:53:42 pm »
What about going 10' sidewalls with cathederal trusses in the area where the lift might go. What is the centers of the trusses on the pole barn going to be? If they are on 8' centers like some pole barn builders could the lift go up between the trusses???
Logged
1985 Crew Cab dually project soon to be SRW Short Bed

Offline frogman68

  • Junior Member
  • ***
  • Posts: 773
Re: 10 ft or 12 ft?
« Reply #16 on: February 11, 2009, 12:44:45 pm »
After hearing Ville I did some more research I think this will be the one I go with

30 Wide 36 Long 13'6 to ceiling in the corners and 16 feet in the center 11,870 installed.
Logged

Offline frogman68

  • Junior Member
  • ***
  • Posts: 773
Re: 10 ft or 12 ft?
« Reply #17 on: July 24, 2009, 06:58:15 pm »
Well after shopping around I found a 30X40X14 with a 10X10 door its around 7500 (delivery and off loading included) some friends will put the posts in and the trusses up I will have pretty much just the siding and metal roof to put up. I am up to lifting 30 lbs so I hope the sheets dont weigh more than that.
Think I will start a new thread with pics of it going up. Plans (hopefully) will be here in a week then 2 to 3 weeks to get a permit and for the materials to arrive.
Logged

Offline choptop

  • Senior Member
  • ****
  • Posts: 2476
  • Extended cab fanatic
    • conversiontrucks
Re: 10 ft or 12 ft?
« Reply #18 on: July 24, 2009, 09:14:24 pm »
Its not the weight of the sheets that gets ya, its the awkwardness of them. Get some help and be careful.
Logged
76 C10 Choptop,76 C10 Swb
85 C10, 85 K10, 85 K20,86 C10,86 K10 (all extended cabs)
86 C30 extended crewcab

Offline Blazin

  • Blazin new trails!
  • Senior Member
  • ****
  • Posts: 6130
Re: 10 ft or 12 ft?
« Reply #19 on: July 25, 2009, 07:53:31 am »
Yeah they weigh three times more when a good gust of wind tries to sail them with you holding on!  ;D
Logged
Some people are like Slinkies. Not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs

Offline frogman68

  • Junior Member
  • ***
  • Posts: 773
Re: 10 ft or 12 ft?
« Reply #20 on: August 30, 2009, 07:24:02 pm »
well the posts are in the ground and the building banded with 2X4's and one roof truss up I rigged a winch and a pulley to put the truss up wasnt perfect but it worked need to come up with a new idea the boom we rented was just to expensive wife will be on the phone tomorrow :)

http://s239.photobucket.com/albums/ff310/frogman1968/Garage/
Logged

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7595
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: 10 ft or 12 ft?
« Reply #21 on: August 30, 2009, 08:12:46 pm »
Great progress, congrats.
Logged
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline frogman68

  • Junior Member
  • ***
  • Posts: 773
Re: 10 ft or 12 ft?
« Reply #22 on: November 16, 2009, 08:51:45 am »
Finished this a few weeks ago never posted pics :)





Went with a 10X10 door

Logged

Offline ccz145a

  • Senior Member
  • ****
  • Posts: 1393
Re: 10 ft or 12 ft?
« Reply #23 on: November 16, 2009, 10:54:52 am »
sweet!
Logged
1975 C10 Silverado LWB, 454CID, TH400, 10bolt 3.42
11MPG Downhill w/tailwind (but there ain't no hills here)

Offline beastie_3

  • Senior Member
  • ****
  • Posts: 3170
  • Josh
    • My truck pics
Re: 10 ft or 12 ft?
« Reply #24 on: November 16, 2009, 12:04:48 pm »
So jealous!! I hate living in the city! Truck doesnt fit in the garage, so I have to do everything on a slanted driveway. Cant work in the street, city ordinance.
Logged

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7595
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: 10 ft or 12 ft?
« Reply #25 on: November 16, 2009, 03:41:15 pm »
Very nice end results, congrats
Logged
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19184
Re: 10 ft or 12 ft?
« Reply #26 on: November 16, 2009, 05:14:00 pm »
Awesome!
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline frogman68

  • Junior Member
  • ***
  • Posts: 773
Re: 10 ft or 12 ft?
« Reply #27 on: November 17, 2009, 06:13:39 am »
Thanks it was alot harder than I thought it would be. No more Pole Barns I will do conventional framing from now on :) . I am hoping to have electric in it before winter sets in. I live in the Peoples Republic of Maryland so I must hire a electrician I can not pull the permit,last estimate I got the guy pretty much told me I am screwed and he can charge what ever needless to say he isnt getting the job.
Logged

Offline Lt.Del

  • Andy aka:SgtDel
  • Senior Member
  • ****
  • Posts: 3864
  • DelbridgePhotography.com
    • www.delbridge.net
Re: 10 ft or 12 ft?
« Reply #28 on: November 17, 2009, 03:19:18 pm »
do you know anyone who is certified?  
If I knew how to do it, and I own the dang garage, I guarantee I would do that myself.  The county person could then go and inspect it afterwards, but no commie is gonna tell me I can't work on my own house/ garage.  
I would at least drill the holes, run the wire, put in the receptacles, hook up the breaker panel, etc...Then some certified dude could officially flip the switch or something. Do it like normal people, just hire someone as a consultant. The labor i will do.
« Last Edit: November 17, 2009, 03:22:33 pm by SgtDel »
Logged

Offline frogman68

  • Junior Member
  • ***
  • Posts: 773
Re: 10 ft or 12 ft?
« Reply #29 on: November 18, 2009, 06:47:17 am »
Quote from: SgtDel on November 17, 2009, 03:19:18 pm
do you know anyone who is certified?  
If I knew how to do it, and I own the dang garage, I guarantee I would do that myself.  The county person could then go and inspect it afterwards, but no commie is gonna tell me I can't work on my own house/ garage.  
I would at least drill the holes, run the wire, put in the receptacles, hook up the breaker panel, etc...Then some certified dude could officially flip the switch or something. Do it like normal people, just hire someone as a consultant. The labor i will do.

If I was just running service from the house I would do it and not get a permit but with putting a new service out to it the electric company wont bring the line to the house till a permit is pulled . I am trying to get just a bare minimum done to get the service then I will do the rest.
I did the adding what the electrician was going to install was going to cost 500 (my store price so he would more than likely get it cheaper) so he wanted 3500 for labor.
Logged
Pages: 1 [2] 3   Go Up
« previous next »